ADDAC System ADDAC200B (2020s)

A tiny, unassuming block of metal that quietly solves one of Eurorack’s most maddening problems—without stealing an inch of space.

Overview

It doesn’t scream for attention. No blinking lights, no knobs, no wild waveforms. The ADDAC200B just sits there, 2HP wide and barely an inch deep, doing one job with quiet authority: distributing a single CV or audio signal to three outputs without loading down the source. In a modular system where patching often means branching a clock, LFO, or envelope to multiple destinations, this kind of reliability is golden. Passive multiples are cheaper and simpler, sure—but anyone who’s tried to fan out a delicate gate signal across a dozen modules knows the risk: voltage droop, timing glitches, or outright failure when the source can’t handle the load. The ADDAC200B sidesteps that with buffered outputs, each capable of driving long cable runs or multiple inputs without breaking a sweat.

And it’s not just for CV. Run an audio signal through it, and it behaves cleanly—no added noise, no coloration, no phase weirdness. That makes it useful for splitting an oscillator before sending it to multiple filters, or duplicating a modulation source for parallel processing chains. It’s the kind of module you don’t realize you need until your patch starts misbehaving, then once you add it, you wonder how you ever lived without it. The build is typical ADDAC: clean black panel (with optional custom colors, if you’re feeling flashy), recessed jacks to avoid cable strain, and a Doepfer-style power connector that plays nice with standard Eurorack bus boards. It draws a trivial 10mA, so even the most power-starved skiff can host a few of these without blinking.

Specifications

Key Features

Two Independent Buffered Multiples

The ADDAC200B packs two completely separate buffered multiples, each with one input and three outputs. This means you can split a clock and an LFO simultaneously without cross-talk or loading issues. Unlike daisy-chained passive multiples, each output is actively driven, ensuring consistent voltage levels across all destinations. There’s no bleed, no timing skew—just clean, reliable signal distribution. It’s especially useful in complex rhythmic patches where gate integrity is critical, or in systems with long cable runs between modules.

Minimal Footprint, Maximum Utility

At just 2HP, the ADDAC200B is about as space-efficient as a Eurorack module can get. It fits into the tightest skiffs and leaves room for more sonically exciting modules. Yet despite its size, it’s built to last: sturdy aluminum panel, recessed jacks to protect cables, and a clean layout that avoids hotspots or strain points. The depth—1.5cm—is shallow enough to fit behind almost any case, including ultra-slim travel rigs. It’s the kind of module that disappears into your system until you need it, then becomes indispensable.

Custom Panel Options for the Aesthetic Purists

ADDAC offers custom-colored front panels for the ADDAC200B, a rare touch for a utilitarian module. Want a red panel with white print in a sea of black? Done. Silver with blue labeling for a retro-futuristic look? Also doable. These aren’t just cosmetic—choosing lighter print on dark panels (or vice versa) improves readability in dimly lit studios. The caveat: custom panels aren’t stock items. They’re made to order, adding 4–6 weeks to delivery and a premium to the price. But for builders who treat their racks like instruments and installations, that personal touch matters.

Historical Context

The ADDAC200B emerged in the early 2020s, a time when Eurorack was no longer a niche curiosity but a mature ecosystem with deep specialization. As systems grew larger and more complex, the limitations of passive multiples became glaring—especially in hybrid digital-analog setups where timing precision mattered. Buffered multiples weren’t new, but they were often bulky, expensive, or buried inside larger utility modules. ADDAC’s decision to make a dedicated, ultra-compact buffered multiple reflected a shift toward solving real-world patching frustrations with surgical precision. It arrived alongside similar minimalist utilities from brands like Intellijel and Mutable, but stood out for its sheer density: two buffers in 2HP, priced accessibly. It wasn’t flashy, but it filled a gap in a way that felt quietly revolutionary.

ADDAC System, based in Lisbon, had already built a reputation for thoughtful hybrid designs—modules that blended analog warmth with digital control. The ADDAC200B wasn’t one of those hybrids, but it shared the same philosophy: solve a problem cleanly, without overcomplicating. It wasn’t trying to be a sound generator or a effects processor. It was infrastructure. And in a modular world where signal integrity underpins everything, infrastructure matters.

Collectibility & Value

The ADDAC200B isn’t a collector’s item in the traditional sense—no limited runs, no vintage mystique, no circuit revisions that dramatically alter performance. It’s a modern utility module, still in production, and readily available from ADDAC and dealers. That said, its value lies in reliability and ubiquity. At 70€, it’s not cheap for a module with no knobs or blinking lights, but it’s priced fairly for what it does. Secondhand units typically sell for 50–60€, depending on condition and whether they include a custom panel.

Failures are rare. There are no moving parts, no delicate components, and the circuit is simple by design. The most common issue reported is power connector strain—especially if the bus cable is tugged repeatedly—but the recessed jacks help prevent that. No known firmware or calibration quirks. Because it’s passive in function (aside from the buffer electronics), there’s little to go wrong. For buyers, the main concern is verifying the module powers up and passes signal cleanly through all outputs. A quick test with a multimeter or oscilloscope will confirm buffer operation. No need to recap, no alignment, no hidden traps. It just works.

If you’re building a skiff or trying to maximize utility in minimal space, the ADDAC200B is worth every euro. It’s not the only buffered multiple on the market—Intellijel’s Buffered Multiple and Mutable’s Buffered Mult are alternatives—but few match its combination of size, price, and build quality. And unlike some boutique modules that become unobtainable overnight, this one isn’t going to vanish. It’s too useful to let that happen.

eBay Listings

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models

• ADDAC System 712 Vintage Pre
• ADDAC System 712
• ADDAC System 800X
• ADDAC System 801
• ADDAC System 802
• 4ms Ping
• ADC 27
• 2hp LPG V2
• ALM AXON-2
• AMS DMX 2000