ADDAC ADDAC200B (2010s–Present)

A microscopic workhorse that does one job flawlessly—splitting and buffering control voltages without crosstalk or signal droop.

Overview

It doesn’t scream for attention. No blinking lights, no sweeping filters, no wild modulation. The ADDAC200B just sits there, 2HP of unassuming real estate on your Eurorack panel, quietly solving one of modular synthesis’s most persistent headaches: signal degradation across multiple patched destinations. You don’t notice it until it’s gone—and when it’s missing, you feel it immediately. Try splitting a single LFO to modulate five different parameters without a buffered multiple, and watch as the waveform sags, timing drifts, and your carefully synced sequence starts to unravel like a loose thread. That’s where the 200B steps in—not with flair, but with surgical precision.

Manufactured by ADDAC System, a Lisbon-based boutique known for thoughtful, no-nonsense Eurorack modules, the 200B isn’t flashy, but it’s foundational. It’s the electrical equivalent of a clean power strip with surge protection: invisible in operation, catastrophic in failure. Unlike passive multiples, which simply wire inputs together and rely on the source module to drive all connected loads, the 200B actively buffers each of its three output jacks. That means it presents a high-impedance load to the input and delivers full-strength, isolated copies to each output—preserving voltage integrity, eliminating crosstalk, and preventing drag on delicate CV sources like slow LFOs or sample-and-hold circuits.

In a system where a single drifting pitch CV can throw an entire composition out of tune, that kind of reliability isn’t just convenient—it’s essential. The 200B doesn’t color your sound, doesn’t add character, doesn’t distort or filter. It does the exact opposite: it stays out of the way. And in a format where digital modules coexist with analog oscillators, where control voltages traverse dozens of patch points, and where a single clock might trigger eight different sequencers, having a trusted signal distributor is like having a reliable translator in a multilingual room—everything gets through clearly, exactly as intended.

Specifications

Key Features

Three Isolated Buffered Outputs

The ADDAC200B takes one input and delivers three identical, actively buffered outputs. Each output is driven by its own op-amp stage, ensuring that loading one output doesn’t affect the others. This isolation is critical when distributing timing signals like clocks or triggers—where even minor voltage sag can cause missed steps or jitter. Unlike passive mults, which are essentially just wire junctions, the 200B regenerates the signal, maintaining its original amplitude and integrity across all three outs. It’s not just splitting; it’s amplifying and redistributing.

Minimal Footprint, Maximum Utility

At just 2HP wide, the 200B is among the slimmest buffered multiples available. In a format where every millimeter counts—especially in skiffs or travel cases—this kind of space efficiency is a game-changer. You can fit six of them across a standard 12HP panel and still have room for a utility knob. That density makes it practical to deploy multiple 200Bs throughout a system: one dedicated to clock distribution, another for LFO fan-out, a third for master modulation buses. It turns what was once a luxury (buffered multiples) into a standard infrastructure component, like Ethernet jacks in a studio wall.

DC-Coupled for CV and Gate Integrity

The module is fully DC-coupled, meaning it passes control voltages without attenuation or phase shift—essential for pitch, modulation, and gate signals that rely on precise voltage levels. While some buffered multiples are optimized for audio and may roll off low frequencies, the 200B maintains flat response from DC upward, ensuring that slow LFOs, S&H noise, and envelope CVs pass through unaltered. This makes it equally useful for distributing both fast triggers and ultra-slow modulation sources, from sequencer steps to drifting ambient sweeps.

Historical Context

The ADDAC200B emerged during the mid-2010s Eurorack boom, when modular systems were transitioning from boutique curiosity to mainstream studio tool. As patches grew more complex, the limitations of passive multiples became glaringly apparent. Early adopters learned the hard way that daisy-chaining CV signals led to tuning instability, timing errors, and unpredictable behavior—especially in larger systems. Manufacturers began offering buffered solutions, but many were bulky, expensive, or buried within multi-function utility modules.

ADDAC System, already known for its clean, functional design language, responded with the 200 Series—a line of ultra-compact, single-purpose modules that addressed specific workflow pain points. The 200B was part of this philosophy: do one thing, do it well, and make it skiff-friendly. At a time when other brands were packing more features into each HP, ADDAC went the opposite direction—proving that sometimes the most valuable modules are the ones that disappear into the background. It wasn’t revolutionary in concept, but its execution—reliable buffering in a 2HP package at a reasonable price—made it a quiet standard.

Competitors like Intellijel, Doepfer, and Mutable Instruments offered buffered multiples, but few matched the 200B’s combination of size, price, and build quality. Doepfer’s multiple modules were often 4HP or wider; Intellijel’s Buffered Mult was 3HP. The 200B carved out a niche as the go-to for minimalists, skiff builders, and anyone who valued signal integrity over flashy features.

Collectibility & Value

The ADDAC200B isn’t a collector’s item in the traditional sense—it’s not rare, it doesn’t appreciate, and it won’t ever be discontinued in a way that sparks eBay bidding wars. But that doesn’t make it any less essential. In fact, its ubiquity is part of its value: it’s the kind of module that shows up in 80% of professional Eurorack builds, quietly doing its job while flashier modules get the spotlight.

New units typically sell for between €50–€70, depending on region and retailer. Used examples trade for €30–€45, often as part of larger system sales. Because it has no moving parts and minimal circuitry, failure rates are extremely low. When problems do occur, they’re usually related to power wiring or damaged jacks—issues easily diagnosed and repaired by any technician familiar with Eurorack standards. There are no known design flaws, no batch issues, and no firmware (it’s entirely analog). The front panel is anodized aluminum, resistant to scratching and fading, and the jacks are standard 3.5mm types, widely available for replacement.

Buyers should verify that the module powers up without drawing excessive current and that all three outputs respond identically to an input signal. A simple test with a multimeter or oscilloscope can confirm voltage tracking and isolation. Because the 200B is so fundamental, it’s often sold without individual testing in used lots—so it pays to check functionality before integrating it into a critical patch. That said, its simplicity makes it one of the most reliable modules in any system. You’re more likely to blow a power supply than a 200B.

For those building or expanding a system, the 200B isn’t a “maybe”—it’s a “how many?” Most experienced users recommend having at least two or three on hand, if not one per major signal type (clock, modulation, audio). It’s the kind of module you don’t miss until you need it, and once you’ve used one, you’ll wonder how you ever patched without it.

eBay Listings

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models

• ADDAC 200PI Pedal Integrator
• ADDAC 816
• ADDAC 100 Series
• ADDAC 101 .WAV Player
• ADDAC 102
• 4ms Ping
• ADC 27
• 2hp LPG V2
• ALM AXON-2
• AMS DMX 2000