Sony VO-9850
A 47-pound editing U-matic that treats audio as seriously as picture — sendust heads, Dolby C, and XLR jacks on a deck you rack-mount and tilt like a proper studio machine.
Overview
Twenty-one point four kilograms. That's what a professional editing VTR felt like in the days when "video deck" meant something you bolted into a 19-inch EIA rack and left there. The VO-9850 measures 426 × 238 × 513 mm and consumes 90W when fully loaded with the BKU-703, BKU-705, and RM-440 options. It is a five-units-high machine, and Sony's documentation makes a point of saying it stays that compact even with the time code board installed — a small mercy for anyone who ever tried to shoehorn a broadcast deck into a crowded rack.
This is a Type 9 series U-matic, and the headline is SP. Sony's own literature explains the SP U-matic technology plainly: the FM carrier frequencies for luminance modulation are shifted up 1.2MHz from conventional U-matic, and the result is an overall quality improvement rather than a marginal tweak. The deck delivers 330 lines of horizontal resolution in SP mode (dropping to 250 lines in conventional mode), with luminance and chrominance kept separate through a DUB connector specifically to minimize generation loss. For a facility doing multi-generation editing, that dubbing path is the whole ballgame — every copy you make without visible degradation is money in the bank.
The audio side is where this deck separates itself from the pack. Sony fitted new sendust heads and redesigned audio circuits, pushing frequency response to 50Hz–15kHz ±3dB and the S/N ratio to 52dB in SP mode. Owners who came up on earlier U-matics will recognize how significant that is; the conventional-mode figure sits at better than 50dB, which tells you the SP advantage was real and measurable rather than a spec-sheet flourish. Wow and flutter is held under 0.18% rms and distortion under 2%. These aren't audiophile cassette numbers, but for a helical-scan video format they're serious, and the sendust heads are the reason the high end doesn't fall apart.
Then there's Dolby C. The VO-9850 builds in the Dolby C-Type Noise Reduction System, which Sony rates as improving the S/N ratio to 72dB measured by the CCIR/ARM filter, r.m.s. — and crucially, it works only in SP recording and playback modes. The deck records a Dolby NR pilot signal onto the audio channels alongside the audio, and on playback it detects that pilot and engages the system automatically. That automatic handshake matters in a shared facility where operators come and go; nobody has to remember to flip a switch on playback. The audio connections are XLR, balanced line in and out at +4dB, which is exactly what you'd expect from a machine meant to live alongside professional audio gear rather than consumer hi-fi. Microphone input is unbalanced at -60dB into 3k ohms, and there's a headphone output adjustable from -26dB to -46dB into 8 ohms.
The transport and search controls are the other place this deck earns its keep. The search dial offers SHUTTLE mode at still, 1/30, 1/10, 1/5, 1/2, 1, 2, 5, and 8 times normal speed in both forward and reverse, plus a JOG mode for frame-by-frame work directed by dial rotation. Still pictures are noiseless, with guard-band noise parked at the top or bottom of the monitor and selectable on or off through the Dial Menu Operation. That menu system is the deck's control hub — it handles time code and user-bit setting for the BKU-705, character size and position, self-diagnostic readouts, hour-meter display, still-timer length, preroll time, and search-dial operational mode, all viewable on the monitor or the LED time counter while you work.
Sony built in two digital hour meters, both counting to 15,000 hours: one tracks accumulated tape-threading time around the video head drum, the other tracks total power-on time. For a buyer looking at a used deck today, those meters are the closest thing to an odometer the machine offers, and they're readable through the search dial and displayed on the monitor. The self-diagnostic function, also surfaced through the Dial Menu, was designed to keep service time to a minimum — Sony's manual is candid that this was a serviceability feature, not a novelty.
The anti-clog STILL TIMER deserves its own mention. Leave the deck in still for more than eight minutes and it automatically drops into LONG PAUSE to protect tape and heads; the timer itself is settable in sixteen steps from 0.5 seconds to 8 minutes. Anyone who has paid for a head replacement knows why this exists. The front panel hinges to 0°, 30°, 60°, or 90°, which sounds like a small thing until you're working at the bottom of a rack, and the RMM-501 Rack Mount Kit — the same one used on the VO-5850/5800 series — handles the 19-inch EIA mounting.
Format compatibility is worth stating plainly because it's central to the deck's pitch. Sony's documentation is explicit that the VO-9850 maintains format compatibility and system consistency with current U-matics — it can be added to an existing Sony editing system with no modification. A built-in 9-pin REMOTE interface (RS-422 serial) plus the optional BKU-705 Time Code Generator/Reader Board enable the accurate, flexible editing operations the machine was sold on. It records and plays the SONY KSP, KSP-S, KCA-BRS, KCS-BRS, KCA-XBR, and KCS-XBR videocassette series or equivalent, with 60 minutes of recording and playback time, and fast-forward or rewind of a KSP-60 U-matic cassette in under four minutes.
On the video side the numbers are what you'd hope for from an SP editing deck: SP-mode S/N better than 46dB color and better than 48dB monochrome, conventional mode better than 46dB color. Inputs and outputs are NTSC composite at 1.0Vp-p into 75 ohms unbalanced, with 7-pin dubbing in and out. External sync, subcarrier, and RF-out levels are all specified in the manual for facility integration. The deck runs on AC 120V at 50/60Hz with an operating voltage range of AC 90–132V, and it's rated for 5°C–40°C operation. Supplied accessories were modest: an operation manual and an AC cord.
What the VO-9850 represents to a collector today is a specific moment in professional video — the point where SP U-matic editing decks got genuinely good audio and serious dubbing performance in a rack-mountable, self-diagnosing package. It is not a light machine, it is not a simple one, and it demands the right cassettes and a working understanding of its menu system. But the engineering is legible in every spec: sendust heads for the high end, Dolby C for the noise floor, XLR for the signal path, hour meters for the honest history of the unit. That's a machine built to be used hard and serviced properly, and it shows.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.