Sony MDS-S37 (1996)
Seven pounds twelve ounces of first-generation ATRAC 4, a slot-loading MiniDisc deck that Sony positioned as the working musician's recorder — and priced accordingly.
Overview
A home MiniDisc deck that weighs 7lb. 12oz. and measures 17 x 4-3/4 x 11 inches is not a toy, and Sony priced it like a serious component: $600 in the US, ¥49,000 in Japan when it arrived in June 1996. That money bought the ATRAC 4 codec running on the CXD2650R chip, a 20-bit A/D converter, a sampling rate converter, and Sony's "Wide Bit Stream" digital I/O scheme. It also bought a machine that reviewers described as transparent and quiet — with a few honest caveats about what the converters could actually deliver.
The S37 is a slot-loading deck, and that mechanism is the first thing anyone notices. Sony's new slot-in transport here is a departure from the tray-loaders common on earlier MiniDisc hardware, and it changes the whole feel of using the machine — you feed the disc in rather than placing it. Around the back and front, connectivity is straightforward: line and optical inputs, line and optical outputs, plus a miniplug headphone jack on the front panel. The headphone jack is a miniplug rather than a full-size quarter-inch, which is a small but telling detail about who Sony thought was buying this — someone with a Walkman and a pair of earbuds as likely as someone with studio cans.
The included remote is the RM-D8M, and the deck will also accept the RM-D10P remote commander — with a caveat covered below. The headphone and analog phono connectors on the S37 are not gold-plated, a point that only becomes visible when you compare it directly against its stablemate, the MDS-JE500, which does have gold-plated headphone and analog phono in/out connectors. Both machines share a page in the Minidisc.org community documentation, and the differences between them are worth understanding before buying either.
Key Features
ATRAC 4 on the CXD2650R
The S37 runs ATRAC version 4 on Sony's CXD2650R codec IC. This was the generation of ATRAC that reviewers had largely stopped complaining about — the German Stereo magazine's October 1996 test (as transcribed on the Minidisc.org community page) noted that the slight improvements in coding complex music weren't audible to the testers, and that ATRAC 3.5 had already scored well against DAT. In other words, by the time ATRAC 4 shipped in the S37, the codec had reached the point where its artifacts were no longer the story. That's a meaningful thing to know about a 1996 MiniDisc deck: the compression wasn't the weak link anymore.
20-Bit A/D Converter and Hybrid-Pulse DA
Sony's spec sheet claims a 20-bit A/D converter, and the deck uses a hybrid-pulse DA stage on the playback side. The independent testers weren't fully convinced. The same German review noted that the converters were "far from Sony's claim of 20 bit resolution," and that the 18-bit converters in the MDS-JA3 were noticeably better — "a few grades," in the reviewer's phrasing. The reason given was architectural: the S37 bundles its ADC and DAC into a single chip, whereas the JA3ES used separate AD and DA chips. That's a real design tradeoff, not marketing spin, and it explains why the S37 sits below Sony's ES-series decks in the hierarchy. For most buyers, though, the reviewer's bottom line was that the converters were completely satisfying, especially at the price.
Music-Synchro Recording
One of the genuinely useful features on the S37 is music-synchro: the recorder starts automatically when the S/PDIF input sees a signal above -60 dB. That's a set-and-forget feature for dubbing from a CD player or another digital source — hit record-arm, walk away, and the deck begins capturing the moment audio arrives. The -60 dB threshold is low enough that it catches quiet intros without false-triggering on silence. For anyone who did a lot of digital dubbing in the mid-nineties, this was the feature that made a standalone MD deck worth owning over a portable.
Sampling Rate Converter and Wide Bit Stream
The built-in sampling rate converter lets the S37 accept digital sources at rates other than 44.1 kHz, which matters if you're feeding it from a DAT machine or a source that isn't Red Book. Sony's "Wide Bit Stream" digital I/O is listed in the specs as an 18-bit digital interface — the question mark in the community documentation reflects some ambiguity about exactly how the bit depth is handled, but the intent was to pass more than 16-bit resolution through the digital path. Whether that mattered audibly is a fair question; the reviewer's verdict on the codec suggests the analog stages were the more audible limit.
Editing: UNDO, DIVIDE, and 1,700-Character Titling
The S37 supports up to 1,700 characters of titling per disc, and its DIVIDE edit function lets you fine-tune edit points in a range of -128 to +127 steps, with each step approximately 0.06 seconds. That's fine-grained enough to split tracks at musically sensible points rather than at the nearest frame. The UNDO function is the safety net — if you botch an edit, one button reverses it. For anyone who used MiniDisc as a serious recording and editing medium, these are the features that separated a real deck from a consumer toy.
Audio Bus Connector and the Pixy System
The audio bus connector is the S37's most distinctive feature relative to the JE500, and it's also the most confusing one. The S37 has no timer recording function of its own; timer recording can only be done when the deck is connected via audio bus to a Pixy system. The audio bus connection isn't required for normal operation — the deck works fine without it — but if you want timed recording, that's the path. There's a further catch: the RM-D10P titler remote cannot be used when the audio bus is connected. So the audio bus is a feature you either need or you don't, and if you don't need Pixy-system timer recording, the connector is just a curiosity on the back panel.
No TOC Cloning
One limitation worth flagging for anyone who came to MiniDisc from the DAT world: the S37 cannot clone a TOC. The machine ejects the disc when power is applied, which prevents the TOC-cloning trick used on some other decks to duplicate disc metadata. If TOC cloning matters to your workflow, this is not the deck for it.
Historical Context
The MDS-S37 arrived in June 1996 at $600 in the US and ¥49,000 in Japan. It sat in Sony's lineup alongside the MDS-JE500, a closely related machine that shares a page in the Minidisc.org community documentation and differs mainly in the audio bus connector and in having gold-plated headphone and analog phono connectors. Both machines were current in the same period, and the S37's audio bus is the feature that most clearly distinguishes it — it's the deck you bought if you were building toward a Pixy-system setup, and the JE500 was the one you bought if you wanted the same core recorder without that path.
The German Stereo review from October 1996 gives a useful snapshot of how the S37 was received at launch: the codec was judged transparent, the DA converter was judged very low noise even with small signals, and the overall verdict was "excellent" with three stars. The review also noted that at normal record levels the AD converter was very quiet, but that at small analog signal levels the S37 had more noise than the MDS-503 and noticeably more than the DAT DTC 790. That's a nuanced reception — a deck that was excellent for typical use but not the quietest thing available at low levels. For a $600 machine, the reviewer's conclusion was that it was completely satisfying for most users.
Collectibility & Value
Used-market data for the MDS-S37 is thin. A tested-working black unit was listed at 57,890 Russian rubles shipped from Tokyo, and eBay listings describe units sold with the original box, remote, and cables — which suggests that complete examples with the RM-D8M remote are the ones to look for. HifiShark maintains a price-tracking page for the model, but no specific sold prices were captured in the available research. The manua.ls user rating averages 9.2 from three users, which is a small sample but a positive one.
Two operational quirks are worth knowing before buying. The first is a possible firmware issue on early machines: "Retry" and "Retry Error" messages can sometimes appear on the display while recording, most often just after you start titling while recording. The more severe "Retry Error" can cause a dropout. The workaround is to enter titles after waiting at least ten seconds after pressing RECORD. The second quirk is that if you stop recording directly after a song, the deck will cut off about half a second of the song — the community explanation is that the record buffer isn't fully written when the STOP key is pressed. The workaround is to press PAUSE, wait, then press STOP. Both of these notes come from a shared JE500/S37 page, and the source does not explicitly attribute them to the S37 specifically versus the JE500, so treat them as plausible but unconfirmed for this model.
No common laser or mechanism failures are documented in the available sources, and no spare-parts availability information was found. The slot-in mechanism is the component most likely to need attention on any used unit, but that's a general observation rather than a documented S37 failure pattern. Buyers should expect to test the slot-load and the digital inputs carefully, and should confirm the remote is included — the RM-D8M is the correct one, and the RM-D10P titler is only usable when the audio bus is disconnected.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.