Scully 285B

A $3,075 broadcast reproducer that does one thing — play tape back — and was built like the studio couldn't afford for it to stop.

Overview

The 285B is the reproduce-only member of Scully's 280B/284B family, and the company's own advertising made no secret of what it was for: a professional-quality playback and editing system aimed at broadcast and studio work, whether as an automated tape player, a quality-control monitor, a control-room reproducer, or a music-library machine. That's a narrow brief, and Scully priced it accordingly — $3,075 in monaural, $3,185 in stereo, with delivery quoted at 30 days ARO. This was never a machine a hobbyist bought on impulse.

What the buyer got for that money was the 280B transport, essentially unchanged. Scully's literature lists motion-direction sensing logic, functionally illuminated push-buttons, edit control, and dynamic braking as standard on the series, and the 285B inherits all of it. The transport takes ¼-inch tape on reels up to 11.5 inches (29.21cm), and it's built to rack: the whole thing occupies just 15.75 inches (400mm) of vertical space, with the electronics mounted behind the transport deck plate rather than in a separate outboard box. That packaging decision matters more than it sounds — in a control room, one rack unit that swallows its own power supply and line amps is worth a lot of saved real estate.

The electronics were configured for the job at hand. There's a 600Ω line output for feeding a console or a transmission chain, and a separate 8Ω (3W) speaker output for cueing, editing, and monitoring, with the speaker gain control right on the front panel where an operator can reach it mid-session. A monitor headset jack sits on the transport panel for the same reason. Electronic setup adjustments are reachable by pulling the head cover, which is the sort of thing a station engineer notices immediately and a collector notices the first time they have to touch the alignment.

Track configurations were offered as full-track mono, 2-track stereo, or ¼-track stereo, and the machine could be ordered with a slope-front console or remote control as accessories (Studio Sound, September 1987, p.58). Scully's family advertising also lists an optional DC capstan servo and a variable speed accessory with LED speed read-out among the 280B/284B series options.

The honest caveat for anyone chasing one today: this is a playback deck, full stop. The 285B does not record. It was designed to sit in a broadcast chain or a QC bench and reproduce tape accurately, and that's the whole assignment. Collectors who want a Scully to actually make recordings need to be looking at the 280B or the 284B-8, not here. What the 285B offers instead is the same heavy transport, the same illuminated controls, and the same edit-friendly braking, minus the record electronics — which in practice means fewer things to fail and a cleaner signal path for pure playback.

Scully built these for facilities, and facilities bought them to run. The reproduce-only configuration, the rack packaging, the cue speaker, the headset jack — every one of those choices points at a machine that lived its life in a rack, not on a shelf. That's also why survivors turn up with rack rash and tired heads rather than collector-grade cosmetics. Parts and service were handled through a distributor network Scully advertised at over 200 locations worldwide, which is a comfort when hunting for a head or a capstan belt decades later — the network is long gone, but the machines were common enough in professional hands that the knowledge didn't vanish with it.

eBay Listings

Find Scully 285B Tape Machines on eBay

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models