Sansui SP-95 (c. 1973)
The Sansui SP-95 is a sealed, two-way bookshelf speaker system from the early 1970s. It's a compact design with some careful engineering in the drivers. It was priced at ¥34,800 per unit around 1973.
The low end is handled by a 25.5 cm (~10") cone woofer built around what Sansui called a two-layer DL cone, with a special coating applied to reduce distortion. The roll edge is damped on both sides, and the voice coil uses a four-layer series winding. The tweeter is a 3.5 cm soft dome made from vegetable fiber. A flexible damping agent and layered glass wool brake it to control diaphragm deformation. Its voice coil uses lightweight copper-coated aluminum wire (C.C.A.W.) in a magnetic circuit rated at 11,000 gauss. Crossover is at 1500 Hz, with an 18 dB/octave low-cut and a gentler 6 dB/octave high-cut. A front control varies the high-frequency level continuously.
The enclosure got the same attention. The baffle and back plate are high-density plywood, and the rest is multi-layer particle board, with reinforcing materials to suppress unwanted resonance. Rated sensitivity is 90 dB/W/m (New JIS), impedance 8 ohms, and allowable input 45W. Frequency response is specified at 40 Hz to 20,000 Hz. Each speaker measures 330 × 521 × 305 mm and weighs 13.1 kg.
The record beyond the spec sheet is thin. No period reviews, production years beyond the circa-1973 price reference, or market history have surfaced. A single current eBay listing for a pair described them as "parts only," and a Craigslist ad for one unit noted it "sounds good" with some cosmetic wear. That is the extent of the documented owner experience. It appears to have been a modest, well-built offering rather than a flagship, but without catalog positioning data, that's inference, not fact.
Known specifications:
- **Type:** 2-way, 2-speaker, sealed (airtight) bookshelf system
- **Woofer:** 25.5 cm cone
- **Tweeter:** 3.5 cm soft dome (vegetable fiber)
- **Frequency response:** 40 Hz - 20,000 Hz
- **Allowable input:** 45W
- **Impedance:** 8 Ω
- **Sensitivity:** 90 dB/W/m (New JIS)
- **Crossover:** 1500 Hz (high cut 6 dB/oct., low cut 18 dB/oct.)
- **Dimensions:** 330 × 521 × 305 mm
- **Weight:** 13.1 kg
- **Price (1973):** ¥34,800 per unit
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.
Related Models
- Sansui 2000A (1968-1970)
- Sansui 5000X (1969-1971)
- Sansui 6060 (1975-1977)
- Sansui 7000X
- Sansui 881 (1974-1976)
- Braun AUDIO-1 (1965)
- Braun AUDIO-250 (1965)
- Magnavox Component Systems (1972)
- Acoustic Research AR (1967-1976)
- Acoustic Research 11