Pioneer RTU-11

The transport half of a professional open-reel system — sold separately, and built to be serviced.

Overview

The RTU-11 is not a complete tape deck. It is the transport unit of Pioneer's RT-2022/RT-2044 open-reel system, and understanding that distinction is the whole key to this machine. Modern Recording (June 1977, p.58) laid out the arrangement plainly in its lab report: the final two digits of the parent model number indicate head configuration, with the RT-2022 being the two-track, two-channel version and the RT-2044 the four-track, four-channel version. Either way, the complete product pairs the RTU-11 transport with the TAU-11 amplifier unit, a separate electronics package. Owners hunting a "RTU-11" on the used market are therefore hunting a component, not a finished recorder — and collectors note that the two halves are frequently separated over the decades, which makes a matched pair worth more than the sum of its parts.

The transport itself is a serious piece of work. Audio (September 1977, p.68) documented the system's manufacturer specifications in full, and the numbers describe a machine aimed well past the consumer market: frequency response of 30 Hz to 28 kHz at 15 ips and 40 Hz to 20 kHz at 7½ ips, harmonic distortion of 0.8 per cent at 15 ips and 1.0 per cent at 7½ ips, and a signal-to-noise ratio of 57 dB at +6 dB level. Wow and flutter came in at 0.04 W rms at 15 ips and 0.08 W rms at 7½ ips, with speed deviation of 0.8 per cent. For a transport-and-electronics pair selling at $1250.00, those figures put it in professional-adjacent territory rather than the living-room bracket.

The mechanical design reflects that intent. According to the manufacturer documentation reproduced in Audio (September 1977, p.68), the head assembly provides direct access to record and playback head adjustments and to all surfaces requiring cleaning and demagnetization — a maintenance-friendly arrangement that owners report is the difference between a machine that stays in service for decades and one that gets shelved. The transport takes up to 10½-inch reels and runs at both 7½ and 15 ips. Fast forward and rewind times are quoted at 110 seconds for 2,400 feet of tape.

Where the RTU-11 gets genuinely interesting is in its tape path and cueing behavior. The tape is metered out of the head assembly by the capstan with the pinch roller on the oxide side, with drive applied to the back of the tape — an arrangement the documentation notes is common among professional units. The cue lever can vary the amount of signal pickup by the playback head even during fast winds, and a pushbutton lock facilitates locating exact edit points. Modern Recording (June 1977, p.61) noted that something prevented the reviewers from being able to "rock" the transport from rewind to fast forward with great precision for cueing and editing.

Under a clear plastic cover on the lower center of the transport sit provisions for several adjustments, including a test oscillator switch with Off, 1 kHz, and 10 kHz positions. The cover is described as easily removable, which matters: these are the sort of trim adjustments a technician wants at hand without disassembling the machine.

The transport measures 18 1/8 inches wide, 16 3/16 inches high, and 10 13/16 inches deep, and weighs 51.2 lbs. The companion TAU-11 amplifier adds 11.3 lbs and stands 5 9/16 inches tall at the same footprint width and depth. Splitting the electronics from the transport was, in the view of the Modern Recording reviewers, a welcome professional touch — it makes for flexibility in installation and permits easier service access to each half independently.

eBay Listings

FIND A PIONEER RTU-11 ON EBAY

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models