JBL XTi60 (c. 2000–2001)
The JBL XTi60 is a floor-standing, three-way, three-driver bass-reflex speaker (some sources describe it as 2.5-way) produced around 2000-2001. It belongs to JBL's XTi series, which also included the XTi10 center channel, XTi20 bookshelf/surround units, and the E150P powered subwoofer. It was sold in natural wood veneer and built in Denmark. Documentation is thin. No original brochure has surfaced in the archive, though service manuals are available in PDF format. The known specs and owner reports agree that this was a serious, well-regarded tower speaker.
The driver complement is a 16.5 cm pulp-cone woofer with a corrugated surround and a bent pole piece to suppress dynamic compression, a 12.5 cm pulp-cone midrange, and a 2.5 cm dome tweeter with a pure titanium diaphragm and aluminum voice coil. The crossover points are 450 Hz and 3 kHz. Rated sensitivity is 88 dB/2.83V/m, nominal impedance is 6 ohms, and allowable input is 75W RMS. Frequency response is spec'd at 50 Hz to 22 kHz.
The enclosure is the most distinctive thing about the XTi60. It's a hexagonal design - a one-piece structure where the front and sides, and rear and sides, flow into each other without seams. It's assembled from just four panels (top, bottom, and two wraparound sections). JBL's intent was to minimize internal parallel surfaces and reduce standing waves. The terminals are gold-plated binding posts that accept banana plugs, and the speaker supports both bi-wiring and bi-amplifier hookups.
Dimensions are 227 mm wide, 900 mm high, and 300 mm deep. Each speaker weighs 15.0 kg. The original price in Japan was ¥59,000 per unit around 2000.
Surviving owner commentary is limited to classifieds and forum posts, but it's very positive. One Russian seller called the XTi60 "the best of all that I have owned," praising its "very balanced sound, with incredible bass." Another described them as "serious acoustics for knowledgeable music lovers," and said they fill both spacious and small rooms well. A forum user considering a move from JBL Balboa speakers to the XTi60 said they'd heard the XTi series was of higher quality. The listings tend to back that up.
The one commonly reported issue is surround rot on the midrange driver. The foam suspension crumbles with age (the midrange driver part number is 9746106 A2105A-S, shared with the XTi80 and XTi100). Used prices in Russia have ranged from ₽21,000 to ₽56,000 depending on condition, with most sellers noting minor signs of age or reupholstered grilles.
- Type: 3-way, 3-driver, bass-reflex floorstanding speaker
- Drivers: 16.5 cm pulp-cone woofer, 12.5 cm pulp-cone midrange, 2.5 cm titanium-dome tweeter
- Crossover: 450 Hz, 3 kHz
- Frequency response: 50 Hz – 22 kHz
- Sensitivity: 88 dB/2.83V/m
- Impedance: 6 ohms
- Power handling: 75W RMS
- Dimensions: 227 × 900 × 300 mm (W×H×D)
- Weight: 15.0 kg
- Made in: Denmark
Several things are missing from the record: no production end date, no original Western price, no professional review measurements, and no confirmed cabinet material.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.
Related Models
- JBL 075
- JBL 077
- JBL 120Ti
- JBL 124A
- JBL 124H
- Braun AUDIO-1 (1965)
- Braun AUDIO-250 (1965)
- Magnavox Component Systems (1972)
- Acoustic Research AR (1967-1976)
- Acoustic Research 11