Gates FM-1B
A kilowatt of phase-shift-modulated FM from Quincy, Illinois — with a multiplex bay already cut into the chassis.
Overview
The Gates FM-1B is a 1 kW FM broadcast transmitter built by the Gates Radio Company of Quincy, Illinois — the kind of box that lived in a cinderblock transmitter building at the end of a dirt road and got its plate voltage checked with a Simpson meter. It puts out "1000 Watts of frequency modulated power" and will run "on any frequency from 88 to 108 Mc," which is the whole FM band in one sentence. A 1961 installation and operation manual survives for it, and that date is about as close as the record gets to a birth certificate; no production run, no original price, and no serial-range data turned up in the research.
What makes the FM-1B interesting to a modern collector isn't the power number — a kilowatt was a respectable but not spectacular station transmitter — it's the way Gates designed the thing for the future it could see coming. The main channel exciter was "specifically designed with multiplex in mind," and the manual says so plainly: "To multiplex the Gates FM-1B is a relatively simple matter." Space was provided directly below the exciter for dropping in the multiplex unit. In other words, a station that bought the FM-1B in mono could add stereo later without buying a new transmitter — a very 1961 piece of forward planning, and the reason these boxes stayed in service long after their mono-only siblings were scrapped.
The FM-1B is a working transmitter, not a museum piece — examples turn up in station classifieds and surplus listings, and at least one was operating at a real FM station (WRTT-FM) feeding an Andrew 1304-2 four-bay antenna. The short-tower, hilly-terrain story from that station — a Height Above Average Terrain of minus 50.2 feet — is a reminder that a kilowatt only goes as far as the site lets it. The transmitter did its job; the dirt did the rest.
Key Features
Direct Frequency Crystal Controlled Oscillator
The FM-1B's carrier comes from a direct frequency crystal controlled oscillator rather than a free-running tuned circuit. For a broadcast transmitter that's the whole ballgame — the station's frequency is a license condition, and a crystal-controlled oscillator is how you keep the carrier where the FCC told you to put it. It's the least glamorous spec on the sheet and the one the chief engineer cared about most.
Phase Shift Modulation
Modulation is by phase shift — the audio is applied to shift the phase of the oscillator rather than to swing a reactance tube across the tank. Phase-shift FM was a known, stable approach for broadcast service in this era, and it pairs naturally with a crystal oscillator, since the crystal stays the reference and the modulation is imposed around it.
Built-In Exciter with a Multiplex Bay
The exciter is built into the transmitter rather than bolted on as a separate rack unit, which simplifies the installation and the tuning. More importantly, the main channel exciter was designed from the start with multiplex in mind, and Gates left physical space directly below it for the multiplex unit. The manual calls multiplexing "a relatively simple matter" — the kind of sentence a station manager reads as "we can add stereo without replacing the transmitter," which is exactly what it meant.
Remote Plate Voltage Control
The plate voltage can be read and adjusted remotely: it's "obtained from TB503 terminal 8 and is controlled by R521." That's a small detail with real operational weight — the engineer on duty could meter and trim plate voltage from the remote panel instead of walking out to the transmitter shack in the rain. It's also the kind of specific terminal-and-potentiometer reference that makes a service manual worth keeping.
Silence-Sensor SCA Muting (Field Modification)
There were enough FM-1Bs in the field with only one SCA subchannel that engineers worked out their own fixes. One documented approach, published by an engineer at KBIM in Roswell, New Mexico, used the empty panel space allotted to the second subcarrier generator to install a silence sensor that muted the subcarrier during quiet passages — the reasoning being that crosstalk complaints almost always arrived during silence, when there was no legitimate sound to cover the artifacts. The circuit bridged across the audio input to the subcarrier modulator, peak-detected the signal through a voltage doubler, and used a tube at zero bias plus a neon coupling bulb to fire a relay that switched the subcarrier oscillator and a pilot light. It's a lovely piece of field engineering and a window into how these transmitters were actually lived with.
Historical Context
The FM-1B's manual carries a 1961 date — the installation and operation instructions are dated "4/26/6l" in the surviving scan, which reads as April 26, 1961, and a library listing gives the manual year as 1961. The transmitter was still in demand two decades later: a 1982 classified in Broadcasting offered a "low time Gates FM 1 B, with 3 yr. old Sparta SS Exciter" for sale, with no price stated. That ad is also a caution — the Sparta exciter was a later replacement, not necessarily the factory exciter, and no source confirms what the FM-1B originally shipped with. A 1976 classified mentions an "FM exciter M5534 on 97.5 MHz," but the source never explicitly ties that exciter to the FM-1B, so it should be treated as unverified rather than assumed.
Stations used them in the field: WRTT-FM ran "a Gates FM 1B transmitter feeding an Andrew 1304-2 4-bay antenna," on a short tower in hilly country that produced a negative HAAT. The transmitter did its job; the site was the limiting factor. That's the ordinary life of a kilowatt FM box — not glamorous, but load-bearing for a whole community's radio.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.