Electro-Voice 635N/D-B
A camera-black version of the mic that launched a thousand news crews — now with a neodymium magnet doing the heavy lifting.
Overview
The 635N/D-B is Electro-Voice's omnidirectional dynamic handheld, the black-finished sibling of the 635N/D, and the whole point of the thing is stated plainly in the company's own advertising: it may look and sound like the legendary 635A, but the N/DYM magnet assembly underneath is the difference. That black semigloss finish exists for a reason — it's the version built for on-camera work, where a beige mic body catches the light and a black one doesn't.
What makes this mic interesting to collectors and working engineers alike is the lineage. Electro-Voice and its dealers consistently describe the 635N/D-B as an "offspring of the legendary 635A microphone," and the family resemblance is the whole selling proposition: the same "hammer-like" toughness, the same omnidirectional pattern, the same long-handle interview form factor, but with a neodymium magnet structure that yields greater sensitivity and increased output. For anyone who has ever pushed a 635A to the edge of a preamp's gain, that extra output is not a marketing nicety — it's the difference between a usable signal and a hiss floor.
It's a dynamic, so there's no phantom power to worry about and no active electronics to fail in the field. The omnidirectional pattern means it doesn't care which way the subject turns, which is exactly why the 635 family became a broadcast staple. Electro-Voice's own copy summed the intent up neatly — classic performance and neodymium innovation harmonizing in one body — and the company positioned the mic for interviews, sporting events, special effects, and voice-overs, citing both the increased output level and the low sensitivity to mechanical shock as the reasons it holds up under those conditions.
Key Features
N/DYM Neodymium Magnet Structure
The headline change from the 635A is the magnet. Electro-Voice fitted the 635N/D and 635N/D-B with a neodymium iron boron assembly it branded N/DYM, and every source that describes the mic agrees on the result: greater sensitivity and higher output than the original. That's the entire engineering story, and it's a good one — a stronger magnet means more signal for the same acoustic input, which is precisely what a reporter in a noisy room or a camera operator with a mediocre preamp wants. The company's advertising leaned hard on the phrase "ultrahigh-output," and while no sensitivity figure in dB appears in the available documentation, the design intent is unambiguous.
Acoustalloy Diaphragm
Inside sits an Acoustalloy diaphragm, which Electro-Voice claims delivers a very smooth response over a wide frequency range while shrugging off the conditions that kill lesser capsules — high humidity, temperature extremes, salt air, and mechanical shock. That last point matters for a handheld interview mic, which gets bumped, dropped, and stuffed into equipment bags. The Acoustalloy claim comes from a single retail source, so treat the "very smooth response" language as the manufacturer's characterization rather than a measured result. No numeric frequency response curve is published in the material available here.
Integral Windscreen and Blast Filter
The 635N/D-B carries an integral windscreen and blast filter built into the head, which is standard practice for a handheld interview dynamic and spares the user from taping on a foam sock. It's one of the few construction details documented for this model, and it's the kind of thing that matters more than it sounds — plosives and wind noise are the two most common ways an outdoor interview gets ruined.
Omnidirectional Pattern
The polar pattern is omnidirectional, full stop. That's the 635 family's defining trait and the reason it turns up on everything from press scrums to sporting events: point it roughly at the sound and it will pick it up, regardless of how the subject shifts. The trade-off is obvious and worth stating — an omni hears the room as much as it hears the person, so it's the wrong tool for isolating a voice in a reverberant space. It's the right tool for capturing whatever is happening in front of it without fuss.
Camera-Black Finish
The "-B" suffix denotes the semigloss black finish, chosen specifically for on-camera use so the mic body doesn't throw a reflection into the shot. The non-B 635N/D came in a nonreflecting fawn beige. Both variants are otherwise described together as a pair throughout Electro-Voice's literature, and the black version is the one that shows up in the field where a camera is pointed at the talent.
Historical Context
The 635N/D-B exists because the 635A was, by Electro-Voice's own account, wildly popular — the company's advertising framed the N/D models explicitly as the answer to a mic that had nothing left to prove. The 635N/D and 635N/D-B were introduced as offspring of that legendary model, keeping the rugged design and the omnidirectional pattern while swapping in the neodymium magnet for more output. Broadcasting magazine's new-product coverage of the period noted the two mics as derivatives of the 635A offering the N/DYM magnet structure for greater sensitivity, with the Acoustalloy diaphragm claimed to hold a smooth response across a wide range while resisting humidity, temperature extremes, salt corrosion, and mechanical shock.
Production years, introduction date, and original list price are not documented in the available material, so this page won't pretend to know them. What is documented is the pricing hierarchy at the dealer level: a period distributor listing shows the 635N/D-B at $125.00 against $105.00 for the beige 635A and the black 635A/B — a modest premium for the neodymium upgrade. Contemporary retail positioning places the model at the upper end of the standard/professional dynamic microphone range.
Collectibility & Value
This is a working microphone, not a museum piece, and the market treats it that way. A Gearspace listing has shown the 635N/D-B at US $145 with a mic clip, and one aggregator lists a wildly unhelpful range from $6.68 to $274.95 that should be read as noise rather than a valuation. Reverb maintains a price guide page for the model, though no specific figure is captured here. The honest summary: resale sits in the low-to-mid hundreds of dollars depending on condition and whether the clip comes with it, and there's no documented collector premium beyond the 635A association.
No common failure modes, repair procedures, or spare-parts availability are documented for this model in the sources available, and no negative owner reports turned up — which for a decades-old broadcast dynamic is less a testament to perfection than a sign that the survivors are the ones that held together. Buyers should expect the usual for a used handheld dynamic: check the grille and windscreen for crush damage, confirm the capsule hasn't gone weak, and don't pay a premium for the black finish unless the on-camera look genuinely matters to you.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.