Bowers & Wilkins Matrix 801 (1987–1998): The Studio Monitor That Conquered the Living Room

The Bowers & Wilkins Matrix 801 has a Matrix-braced cabinet and a Nautilus-inspired tweeter. It brought Abbey Road's clinical precision into high-end homes worldwide.

Overview

The Bowers & Wilkins Matrix 801 launched in 1987 and became the new flagship of the Bowers & Wilkins domestic lineup. It took over from the Bowers & Wilkins 801, a speaker used in the control rooms of Abbey Road Studios. The Matrix 801 was more than a cosmetic update. It refined the idea that time-accurate, low-distortion sound belonged in your sitting room, flanked by bookshelves and Persian rugs, and not only with engineers in soundproof booths.

Most high-end speakers of the day were still wrestling with cabinet resonance and phase coherence. Bowers & Wilkins had already solved it - on paper. The Matrix interior bracing system is a lattice of interlocking panels inside the cabinet, and it reduced panel flex to near-zero. Knock on a vintage pair and it doesn't so much as cough. It's like knocking on a block of granite. The tweeter is a 1" diamond dome loaded with a tapered tube that vents rearward energy in a way that mimics the Bowers & Wilkins Nautilus 801's famous "squashed trumpet" design. That was measurable, not just theory. It made cymbals shimmer without turning shrill, even at volume levels that would liquefy lesser speakers.

Specifications

Key Features

• Matrix Interior Bracing: This wasn’t just cross-bracing—it was a three-dimensional lattice of plywood struts forming a rigid internal skeleton. Most speakers of the era used a few flat braces; the Matrix system turned the cabinet into a near-rigid monolith. The result? Cabinet coloration dropped so low that reviewers at Stereophile in 1991 described the sound as “vanishing,” leaving only the music. If you’ve ever heard a speaker where the bass seems to come from the floor rather than the box, that’s the Matrix at work.
• Nautilus-Derived Tweeter Loading: Long before the full Nautilus 801 launched in 1993, B&W was experimenting with tapered, resistively loaded tubes to absorb rearward sound waves from the tweeter. In the Matrix 801, this tube—visible as a short, flared duct behind the dome—dissipated energy that would otherwise reflect back into the driver and smear the sound. It’s why the 801’s highs are so transient-accurate: no ringing, no “etched” glare, just clarity that feels almost surgical.
• Paper/Kevlar Woofers: B&W’s signature yellow cones weren’t just for show. The aramid fiber (Kevlar) reinforcement in the paper matrix added stiffness without mass, allowing the 8.7” drivers to move air with authority while resisting breakup modes. Paired in a bass-reflex configuration, they delivered deep, articulate bass down to 20 Hz—rare for a domestic speaker in 1987, especially without a subwoofer.
• Time-Coherent Design: The drivers were physically aligned so that their acoustic centers lay on a single vertical plane. Combined with a carefully tuned crossover (first at 380 Hz, then 3.2 kHz), this ensured that all frequencies arrived at the listener’s ear at the same time. The effect? A soundstage so precise it could place a violinist three feet behind the speaker plane—and keep her there, rock-steady, even as the music swelled.

Historical Context

The late 1980s saw the audiophile market splintering. On one side, minimalist single-driver designs like the Celestion SL600 were winning people over with their "less is more" purity. On the other, companies like JBL and Klipsch leaned into high efficiency and horn-loaded designs for sheer dynamics. Bowers & Wilkins took a third path: scientific rigor. The Matrix 801 wasn't about euphonic warmth or romantic coloration. It was about transparency. It told you exactly what the recording engineer heard, warts and all.

The Matrix 801 descended directly from the original 801, which had become a studio standard because it was honest, not flashy. The Matrix update refined that: better bracing, improved driver damping, and a more sophisticated crossover. The Series 2 arrived in 1990, and the Series 3 in 1993. With a few feet from the wall and a solid stand, the Matrix 801 could deliver both the punch of rock and the delicacy of a solo harp with equal conviction.

Collectibility & Value

Today the Matrix 801 is sought after, though not quite rare. Production spanned over a decade, and B&W built them solidly enough that many survive. In 2025, a well-maintained pair in good cosmetic condition typically fetches between $3,000 and $6,000 USD, depending on finish, series, and provenance. Rosewood and Black Ash are particularly prized, especially on the Series 3, which featured improved finish durability. These are aging speakers, and two issues plague survivors. First, the foam surrounds on the bass-reflex ports degrade over time, leading to flaking and loss of bass response. Replacement kits exist, but the job is fiddly. Second, the midrange dome can oxidize if exposed to high humidity, resulting in a "crackly" distortion under load. Listen before buying.

For collectors, the Series 3 is the sweet spot: it has the most refined crossover and the best build quality. But the original 1987 model holds a certain vintage charm, especially if it still wears its original B&W badges. And if you find a pair that once graced a recording studio? That’s a museum piece. The Matrix 801 wasn’t just a speaker—it was a benchmark. And for a generation of audiophiles, it remains the gold standard against which all others are measured.

eBay Listings

BOWERS & WILKINS SPEAKERS MATRIX 801 ANNIVERSARY EDITION SER

$3,600

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models

• Bowers & Wilkins 805
• Bowers & Wilkins 805S (2007)
• Bowers & Wilkins CDM 7
• Bowers & Wilkins CM1 (2006)
• Bowers & Wilkins DM110 (1984)
• Braun AUDIO-1 (1965)
• Braun AUDIO-250 (1965)
• Magnavox Component Systems (1972)
• Acoustic Research AR (1967-1976)
• Acoustic Research 11