Ursa Major 8X32
A digital reverberator from the early 1980s whose spec sheet reads like a wish list: 32 non-volatile memories, four programs, and decay times stretching toward twenty seconds.
Overview
The 8X32 arrived at a moment when digital reverb was still a novelty in most rooms, and Ursa Major pitched it accordingly — as a studio, broadcast, and live-performance tool rather than a curiosity. The front panel is microprocessor-controlled, with a separate LED read-out and control for each adjustable reverberation parameter, which in practice means you're not hunting through menus to find out what the machine is doing. The headline convenience is a bank of 32 non-volatile storage registers: 32 complete reverb set-ups can be stored, recalled, and edited at will. For a working engineer in the early Eighties, that was the difference between a box that rewarded patience and one that punished it.
The architecture is built around four basic programs, ranging from a small, fast-diffusing Plate to a large, echoing Space simulation. Within each program, 16 decay times are selectable, and both the early reflection pattern and the initial reverberation can be independently adjusted — level in eight steps, delay time roughly 6–9 mS across 16 steps. The system bandwidth is 8kHz and the dynamic range is 80dB. Those numbers are modest by later standards, but they describe a machine with a clear design brief: musical, controllable ambience rather than a spec-sheet showpiece.
Controls and displays are available on the front panel, on a remote unit suitable for use on consoles, or both — a configuration choice that speaks to how the 8X32 was expected to live in a rack. The company's own advertising billed it as putting "pure magic at your fingertips," promising everything from a concert hall stage to vast empty canyons to a bright, tight plate that adds body to brass and drums, and the 8X32's acoustic spaces were described as rich, uncolored, and clean even with difficult material and decay times as long as 20 seconds (Studio-Sound, February 1985, p.104). That's marketing copy, and it should be read as such. What it does capture is the intended range: the 8X32 was sold as a machine that could conjure very different spaces from the same box.
Later enhancements added an optional remote and capability for computer-automated mixdown interface, and pushed the adjustable parameters — early reflections, initial reverberation, decay time, and low and high frequency decay — onto pushbuttons within each of the four basic programs. The same materials describe the system as synthesizing reverberation over a wide range of natural and unnatural spaces, with decay times up to 20 seconds. That 20-second figure is the one that separates the 8X32 from polite little plate boxes: it's a reverb that can be asked to do things a real room never would.
The 8X32 also turns up in contemporary broadcast-industry roundups alongside the Lexicon 224X and 200, the Eventide SP2016, the MICMIX Master Room, and the Quantec room simulator — company that tells you what tier of machine this was aimed at. Those same roundups note that microprocessor-and-memory designs like the 8X32 allowed pre-settable programs to be recalled instantly, which is precisely the workflow the 32 registers were built to serve. Whether it matched the Lexicons in the room is a question the surviving documentation doesn't answer; what it does confirm is that the 8X32 was considered part of that conversation.
A later Mk II variant appears in the same era's product listings, described with a 20-second decay time, 64 memories, eight reverb programs, and an optional remote control — a useful reminder that the 8X32 line wasn't static. Collectors chasing a specific feature set should confirm which version they're looking at before assuming the 32-register, four-program specification applies.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.