Universal Audio 175-B

The smallest limiter on the market in its day — and the tube compressor that quietly outlived every bigger box in the rack.

Overview

The first thing a collector notices about the 175-B is how little rack space it eats. Universal Audio built it into just 3½ inches of a standard 19-inch rack, which made it the smallest limiter available when the trade press first covered it — a genuine engineering flex in an era when competing limiters sprawled across ten inches or more of panel. The trick was miniature tubes and military-type printed circuitry, packed with deliberate parts placement so the thing would still behave. A hinged front panel swings open for access to the innards, which is the kind of service-friendly touch that separates professional gear from consumer boxes.

Inside, the circuit is conventional in outline but unusual in execution. Where most limiters of the period leaned on pentodes, the 175-B uses triodes instead. Daven attenuators step in 2 dB increments at both input and output, with a vernier alongside each to cover the intervening range — so you can dial a level precisely rather than living with coarse jumps. The front panel carries patch jacks for input and output in addition to a rear terminal strip, and there's a switchable VU meter plus provision for a remote meter. Tube-balance controls are furnished, and the unit generates its own internal balance signal, which means you don't need to drag external test gear over to set it up. Attack and release are continuously variable and mounted right on the front panel.

The numbers, as tabulated in a contemporary limiter survey, put the 175-B in serious company: a 12:1 compression ratio, attack time from 0.3 to 1.0 microseconds, release from 0.027 to 0.527 seconds, input and output levels spanning -24 to +13 dBm, 37 dB of gain, and a noise floor of -67 dBm. Frequency response is quoted at ±0.5 dB from 20 to 20,000 cps, with harmonic distortion held below 1.0 percent from 50 to 15,000 cps. That noise figure is the standout — quieter than several of the larger, more expensive limiters it was measured against, and the response is flat well beyond what most rooms could resolve. The same survey listed the 175-B at $425.00, making it the least expensive unit in the comparison while giving up nothing in measured performance.

What the 175-B was designed to do is stated plainly in the product announcements of the day: provide high-gain, low-distortion linear amplification at levels below the threshold of limiting, and limit cleanly above it with negligible added distortion. It's a true peak limiting amplifier, self-contained power supply and all — no external rack of support gear required.

The 175-B's place in studio history is as a predecessor to the 1176, and that lineage is not marketing talk. The 175B and its sibling 176 were the first compressors built solely for studio use, and only around a thousand units were made in total, which is why working examples are among the most sought-after compressors on the vintage market. The 175-B turns up in studio inventories across the decades — Stillwater Sound Studio in Stamford listed a pair among its outboard in a 1983 Mix directory, and a September 2019 Pro-Sound review (p.31) noted that Universal Audio had reissued the 175B and 176 as a tube compressor plug-in collection, evidence the circuit remained a reference point for engineers decades on. That's the tell of a genuinely useful piece: not a shelf ornament, but a tool engineers reach for on the take that matters.

Collectors should expect the usual tube-era maintenance — the internal balance signal and the front-panel access exist precisely because these units need periodic attention — and should verify tube condition and transformer health before committing. Prices for original hardware are not documented here; the market for a thousand-unit production run of a foundational studio compressor speaks for itself.

eBay Listings

Universal Audio 175-B on eBay

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models