Sony WRU-806A

A receiver module you don't buy on its own — you buy it six at a time and bolt it into a rack.

Overview

The WRU-806A is not a product in the way most of the gear in this archive is a product. It's a diversity receiver module — a single slot's worth of UHF wireless reception, designed to be stacked inside Sony's MB-806A Tuner Base Unit, which holds six of them in a single rack space. The manual for the 800 Series is blunt about the architecture: "slots for six WRU-806A diversity receiver modules, with an internal antenna divider for six channels of diversity operation in a single rack space." Collectors who chase standalone receivers tend to overlook the module format entirely, and that's a mistake — this is the engine of a multichannel system, not an accessory to one.

What the module receives is the 800 MHz UHF band. According to Sony's own documentation for the 800 Series, the range runs from 770 to 806 MHz across three sub-bands — 794 to 806 MHz (channel group 68), 782 to 794 MHz (66), and 770 to 782 MHz (64) — with a total of 282 selectable wireless channels. That channel count is the whole point. The manual frames frequency-agile synthesis tuning as the first line of defense against interference, because RF conditions change from venue to venue and night to night. For anyone who has fought a stubborn dropout at the same address every show, the argument lands.

The reception section of the manual lists the WRU-806A's tuning as a crystal-controlled PLL synthesizer, with reference deviation of ±5 kHz and a frequency range of 100 Hz to 15,000 Hz. Selectivity is specified at more than 60 dB and spurious rejection at more than 70 dB — figures that speak to a receiver built to reject the neighbors rather than merely tolerate them. Signal-to-noise is quoted at more than 60 dB A-weighted, though the manual's own comparison table muddies this slightly by listing a second figure of more than 30 dB A-weighted at a 10 dBµ RF input, with the 60 dB number applying at higher input levels. Read that as honest rather than contradictory: a clean signal is quiet, a weak one degrades, and Sony printed both numbers instead of only the flattering one.

Because it lives in the MB-806A chassis, the module inherits the base unit's connectivity. Each tuner gets its own XLR output, and the chassis provides a composite mix output of all six channels. Output level is switchable between -58 dBm for MIC and -20 dBm for LINE. Mix (October 1999, p.223) described the MB-806A as carrying six individual XLR connectors plus that composite mix output, along with a global mic/line switch, a built-in antenna divider capable of remotely powering optional active UHF antennas, and an antenna gain switch to compensate for distance. That last detail matters more than it sounds — a gain switch on the chassis is how a system stays usable when the antennas have to live far from the rack.

The scaling story is where the 800 Series gets interesting. Six modules in one base unit is the baseline. Add the optional WD-820A Antenna Divider and a single pair of AN-820A active antennas, and Sony's literature claims up to 11 simultaneous channels; the manual's own feature list also cites a figure of up to 19 simultaneous channels on that same antenna pair. Those two numbers sit uneasily together in the same document, and collectors should treat the larger figure as the ceiling under the most favorable configuration rather than a guarantee. Either way, the architecture is the point: one antenna pair, many channels, no forest of whips.

The base unit also handles the housekeeping that multichannel RF demands. Auto channel assignment programs additional receiver modules for interference-free operation without hand-tuning each slot. AF, RF, and battery alarms report by both LED and LCD, with channel indication on the LCD alone. There's an RF input attenuator switch at 10 dB or 0 dB, and the chassis ships with passive antennas for rear mounting, with provision to move them to the front. For a rack that has to be reconfigured between venues, that front-mount option is the kind of small decision that saves an afternoon.

Period coverage of the 800 Series leaned on theatrical and broadcast use rather than studio work. Mix (October 2001, p.250) reported on the system's adoption in Broadway sound, quoting a user who needed a compact, stable, frequency-agile wireless rig — and noting that the arrival of digital television broadcasting in New York added a new dimension of potential interference for live theater, a problem the 800 Series was well suited to dial around. That's the real case for the WRU-806A: not pristine audio for its own sake, but the ability to move channels when the RF landscape shifts under you. EQ (August 2001, p.102) carried the same Broadway account in an advertisement, which is worth flagging — some of the loudest praise for this system in print came from Sony's own marketing rather than independent measurement.

Buying one today is a peculiar exercise. The module is useless without the MB-806A chassis, and the chassis is useless without modules, so the two trade as a system or not at all. The manual's FCC note is also worth heeding: use of Sony wireless devices is regulated under Part 15 and Part 74, and users are required to obtain an appropriate license. Buy one because you want to understand how a proper multichannel UHF front end was built, or because you have a venue and a license — not because it's a bargain.

eBay Listings

SONY WRU-806A on eBay

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models