Yamaha DTR2

A rack DAT deck that promised 103 dB of signal-to-noise and arrived just as the format's future was being decided by everybody but the people buying tape.

Overview

The DTR2 is a rack-mount R-DAT recorder, and the numbers Yamaha put on it were not shy: 103 dB signal-to-noise ratio, 96 dB dynamic range, 100 dB channel separation, and 0.0025% total harmonic distortion. Those are the figures of a machine built to be trusted in a professional chain, not a consumer toy that happens to record digitally. The conversion is delta-sigma on the A/D side, and the deck carries twin 24-segment peak meters — the kind of granular, honest metering that tells a recording engineer exactly where the signal is sitting rather than approximating it with a handful of LEDs.

Connectivity is where the DTR2 makes its professional case: four types of I/O connections. For a format that lived and died on whether it could slot into an existing studio without a pile of adapters, that flexibility mattered. The deck samples at both 44.1 and 48 kHz — the two rates that covered CD work and the then-standard professional rate — and offers digital outputs alongside the analog connections.

When Yamaha launched the DTR2, the trade press treated it as a signal event. Studio Sound (May 1991, p.14) reported the launch with a price around £1,100 ($2,000) and drew a conclusion that reads now with a certain poignancy: when one of the major manufacturers commits to a DAT machine, the magazine reasoned, you can be certain DAT is here to stay. It was a reasonable read of the moment. It was also wrong, though not because of anything the DTR2 did.

What the DTR2 actually did was work. It shows up in the equipment lists of working rooms — EQ Magazine (May 2001, p.37) documented it sitting in the rack at Living Room Music in Glenora, Ontario, alongside an Akai DR8, a Fostex 280, and a NAD cassette deck. That's the tell for this machine: it wasn't a curiosity on a shelf, it was a working tool in a working studio, parked next to both the hard-disk future and the cassette past and holding its own.

The specs back up the placement. A 103 dB S/N ratio and 96 dB dynamic range put the DTR2 comfortably in the range where the tape itself, not the electronics, is the limiting factor. The 0.0025% THD figure is vanishingly small — the kind of number that means the deck is transparent and you're hearing the source, the mic, and the room, not the recorder. Channel separation of 100 dB means the stereo image stays put. None of this is glamorous. All of it is what you want from a format that was sold on the promise of perfect copies.

The twin 24-segment meters deserve a second mention because they're the interface between engineer and machine. Twenty-four segments per channel is enough resolution to see a signal move in real time, to catch a transient before it clips, to ride a vocal without guessing. Consumer DAT decks gave you a bar graph and a hope. The DTR2 gave you instrumentation.

And then there's the awkward part. The DTR2 arrived in 1991 into a market that was already being reshaped underneath it. The same Studio Sound launch report that covered the DTR2 also covered Yamaha's DMC1000 digital console, the DRU8 digital recorder, the DMR8, and a wave of hard-disk recording systems from Roland and others. The magazine's own pages were full of the machines that would eventually make DAT a footnote. The DTR2 was launched into a format war it would win on merit and lose on history.

For collectors and studio people today, the DTR2 occupies a specific and slightly bittersweet place. It's a well-built, well-specified professional DAT deck from the company that arguably did more than any other to make digital audio respectable in the studio. It records at the rates you need, it meters like a professional machine, and it connects to whatever you've got. What it can't do is change what happened to the format. The tapes are still out there; the decks are still out there; the question of whether either will still work when you power them up is the one that keeps DAT owners up at night. Yamaha built the DTR2 to last. Whether the medium did is a separate question.

eBay Listings

YAMAHA DTR2 ON EBAY

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models