Tascam ATR-60-4HS
A half-inch four-track built for people whose rent depended on the tape not stretching.
Overview
Half an inch of tape carrying four tracks — that's the whole proposition of the ATR-60-4HS, and it's a proposition aimed squarely at working studios rather than hobbyists. Tascam's own advertising for the ATR-60 line opened with the line that "quality plus speed equals success" in the production business, and pitched the whole series at "those who make their living with recorders." That's marketing copy, not a verdict, but it does explain the design priorities: this is a machine built around the assumption that it will be started and stopped thousands of times, synchronized to picture or to other decks, and expected to hold alignment through all of it.
The 4HS sits within the ATR-60 family. Tascam's literature lists the ATR-60-2T as the IEC-standard center-track time-code machine, the ATR-60-2N/2D as a quarter-inch mastering deck, the ATR-60-2HS as half-inch high-speed mastering, the ATR-60-4HS as half-inch four-track high-speed mastering or multitrack, and the ATR-60-8 as a half-inch production-quality eight-track. So the 4HS is the four-track option in a lineup that spans two-track mastering through eight-track production — the same transport and electronics philosophy, scaled to a track count that made it useful for both stereo mastering and small multitrack sessions. The same advertisement ran across Mix (December 1986, p.36), Mix (January 1987, p.27), DB-Magazine (November 1986, p.5), DB-Magazine (January 1987, p.5), and Recording-Engineer (December 1986, p.75), which tells you how hard Tascam pushed this series into the trade press.
The single most consequential design claim in Tascam's own copy concerns the deck plate: it "won't flex. Ever." The argument is that a flexing deck plate introduces phase error and wow and flutter that you then have to chase in post-production, and the ATR-60's answer is a plate rigid enough that the problem never arises. Whether or not the absolutism of "ever" survives scrutiny, the underlying point is real — on a four-track machine used for mastering, mechanical rigidity is not a luxury, it's the difference between a usable master and a re-cut.
The second pillar is the Omega Drive, which Tascam describes as putting less stress on the tape so that the cumulative tension of a thousand start/stop passes doesn't reach the tape itself. Anyone who has run a tape machine in a production environment knows exactly what this is about: tape stretch and edge damage accumulate, and they accumulate fastest on machines that get shuttled constantly. The company's later copy claims the Omega Drive "virtually eliminates tape stress," which is the kind of phrasing a marketing department reaches for, but the design intent is clear enough.
Then there's the head story, which is the part that matters most to anyone actually using the machine. Tascam designed and manufactured the heads in-house, and the company's stated consequence is that Sync frequency response equals Repro response — meaning you don't have to rewind and switch monitor modes to make a critical audio decision. On a four-track deck being used for overdubs, that's not a small convenience. It means the sync head is good enough that confidence monitoring doesn't cost you accuracy.
Sync Lock and the servo control get similar treatment in the copy: Tascam claims the "most responsive servo control in the business," and the practical promise is that the machine locks up instead of making you wait. Time Code Lock keeps time code coming off the sync head regardless of which audio monitor mode you've selected, so a synchronizer doesn't get conflicting messages when modes are switched mid-session. And Input Enable/Disable lets you monitor any source without repatching or touching mixer settings — a small feature that exists specifically to prevent the kind of abort that comes from a hurried patch change in the middle of a take.
On interfacing, Tascam notes that long cable runs don't bother the ATR-60 because +4 dBm, +8 dBm, and even +10 dBm levels are available. That's a studio-practical detail rather than a headline spec, but it's the kind of thing that determines whether a machine drops into an existing installation cleanly or fights it.
What the available documentation does not give is the sort of hard measurement a collector wants: no frequency response figures, no wow-and-flutter number, no signal-to-noise spec, no original retail price, and no confirmed production run. The trade-press material from 1986 and 1987 establishes that the series was actively marketed in that window, but the fact sheet carries no start or end year for the 4HS specifically. Treat any claim about how many were built or what they cost new with suspicion unless it comes with a receipt.
For a modern buyer, the appeal is straightforward: a half-inch four-track with in-house heads, a rigid transport, and sync facilities designed for production work. The caution is equally straightforward — a machine of this class lives or dies on head condition and transport alignment, and neither is cheap to restore. The features that made it valuable in 1987 are the same features that make it demanding to keep running now.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.