Tascam ATR-60-2HS
A half-inch, high-speed two-track mastering deck from the ATR-60 family — the one Tascam built for people whose rent depended on it locking up fast.
Overview
The ATR-60-2HS is the half-inch high-speed mastering member of Tascam's ATR-60 series, a five-machine lineup the company pitched squarely at working production rooms rather than hobbyists. Tascam's own advertising for the series was blunt about the audience: these were recorders "for those who make their living with recorders," designed with what the copy called a philosophy of "function over flash" and "performance without complication." That's marketing language, but the feature list underneath it reads like a spec sheet written by someone who'd been burned by a flaky deck at 2 a.m.
The defining mechanical claim is the deck plate. Tascam advertised that on every ATR-60 the plate "won't flex. Ever," with the stated consequence that operators wouldn't be "compensating for flex-induced phase or wow and flutter in post production." Whether or not the plate is literally immovable, the point of the design is real: a transport that holds its geometry under load keeps tape path stable, and tape path stability is the whole ballgame on a two-track mastering machine. The second pillar is the Omega Drive, which Tascam claimed "puts less stress on your tape," so that "the cumulative tension of a thousand start/stop passes" wouldn't reach the tape itself. For a deck used in session work — punch-ins, shuttling, repeated passes over the same reel — that's a meaningful promise, though it's a manufacturer claim rather than an independently measured result.
The head design is where the 2HS earns its keep in a production context. Tascam stated that heads designed and manufactured in-house mean "Sync frequency response equals Repro," so the operator doesn't have to rewind and flip modes to make a critical audio decision. In plain terms: what you hear in sync is what you'll hear on playback, which matters enormously when you're making level and EQ calls against picture or against a second machine. That's paired with Sync Lock and what Tascam called "the most responsive servo control in the business," plus Time Code Lock, which keeps time code coming off the sync head regardless of the audio monitor mode selected — the stated purpose being to keep a synchronizer from receiving "confusing double messages when modes are switched." If you've ever chased a sync gremlin through a mode change, that feature will read as either thoughtful or overdue, depending on your history.
The 2HS also carries Input Enable/Disable, letting the operator monitor any source without repatching or resetting the console — Tascam framed this as avoiding "a common cause of aborts," which is a polite way of saying that repatching mid-take ruins sessions. And the output levels are unusually accommodating: +4 dBm, +8 dBm, and even +10 dBm are available, so long cable runs to a distant console or rack don't bother the machine. That's the kind of detail that never shows up in a brochure headline and always shows up in a real studio's patch bay.
What the 2HS is *not*, per Tascam's own lineup copy, is a quarter-inch machine. The ATR-60 family split by format and purpose: the ATR-60-2T took the IEC-standard center-track time code role, the ATR-60-2N was the quarter-inch mastering deck, the ATR-60-2HS was half-inch high-speed mastering, the ATR-60-4HS was half-inch four-track high-speed for mastering or multitrack work, and the ATR-60-8 was the half-inch production-quality eight-track. Later Tascam copy adds an ATR-60/16 one-inch sixteen-track to the roster. So the 2HS sits in a specific slot: two tracks, half-inch tape, high speed, built for the mastering and mixdown chair rather than the tracking floor.
Tascam ran essentially the same "Built for the Demands of Production" spread across the trade press through the mid-to-late 1980s — Mix (December 1986, p.36) carried it, and Recording Engineer (December 1986, p.75) ran the same copy naming the ATR-60-2HS as the half-inch high-speed mastering deck in the five-machine family. DB Magazine (January 1987, p.5) and Mix again (May 1987, p.13) repeated it. The campaign's persistence tells you something about the market the ATR-60 was aimed at: this was a series Tascam kept pushing to professional buyers across multiple trade titles over more than a year, not a one-off announcement.
A caveat worth stating plainly: the available documentation for the 2HS is overwhelmingly Tascam's own advertising and manual material. There is no independent bench test in the source record, no measured frequency response, no wow-and-flutter figure, no signal-to-noise number, no original list price, and no production-year range. Collectors and buyers should treat the performance claims above as manufacturer assertions. What can be said with confidence is what the machine was designed to do and who it was designed for — and on that count the record is clear and consistent across every piece of period copy.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.