Shure M677

Six more microphone inputs, no new console required — the "six-pack" that let a working sound system grow without being replaced.

Overview

The M677 is the kind of accessory that solves a problem most people don't think about until the day they need it: you've got a sound system with a four-channel Shure mixer at its heart, the room wants six microphones, and nobody's budget covers a whole new console. Shure's answer, announced in 1976, was a small add-on box the trade press quickly nicknamed the "six-pack" — an accessory mixer that adds up to six additional low-impedance, balanced microphone inputs to an existing Shure setup, with those inputs switchable to line level.

What makes the M677 interesting isn't any single spec but its role in the system. Shure designed it explicitly as a "slave" mixer for the M67 and M68 series microphone mixers, the SE30 gated compressor/mixer, the M610 feedback controller, and the M63 audio master. Used with an M67 or M68, it provides a method of stacking mixers — and the arithmetic is the point. Stacking an M677 onto a pair of four-channel mixers yields two additional microphone-level inputs over what those two units offer alone. Pair it with an SE30 and the operator can convert that unit's painput mixer system into a nine-input mixer, which is the sort of capability that matters for high-quality sound reinforcement, radio or telephone broadcasting, and sound recording work. Combine it with an M63 Audio Master and you get a six-channel microphone mixer — microphone or line-level signals — with a 600-ohm line out. Add an M610 and the combination provides six inputs plus a one-octave graphic equalizer.

Power is handled sensibly for field and install work alike: the M677 can be powered either from the nominal 28 to 30 Vdc output of the attached master mixer or from a separate A67B Battery Power Supply. Recording-Engineer (August 1976, p.69) covered the launch as part of its new-products roundup, describing the metal chassis as completely enclosing the circuitry and shielding it from interference — a detail that matters when this thing sits in a rack next to power amps and broadcast gear. The same issue's follow-up coverage (p.70) confirmed the dual powering arrangement. Modern Recording (October 1976, p.29) ran the announcement under its Shure new-items column, framing the M677 alongside the company's SR-series professional sound reinforcement components.

This is not a glamorous piece of gear, and collectors should be clear-eyed about that. It's a utility expander, the sort of item that lived in broadcast racks, church sound booths, and small studio closets, and it turns up today mostly as a loose accessory in classified listings rather than as a sought-after object in its own right. One 1990s-era classified ad in the pages of a recording magazine listed an M677 (Mic Mixer) for sale alongside a DBX de-esser and a Drawmer gate — which tells you exactly what tier of the market it occupies: useful, unglamorous, and priced accordingly. That's not a knock. If you're running an M67 or M68 and need more inputs, the M677 is the correct period solution, and it does its one job without fuss.

eBay Listings

SHOP SHURE M677 ON EBAY

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models