RCA TK-40A (1954)
Four hundred and forty pounds of camera and viewfinder, three image orthicons, and the color revolution RCA bet the company on.
Overview
Add up the numbers and the scale of the thing lands before anything else: the camera body alone runs 44 inches long, 21 inches wide, and 14-1/2 inches tall, and it weighs 250 lbs. less objective lenses, panning and focus handles. The viewfinder is a separate 34-1/8 inches long, 13-15/16 inches wide, and 11-1/8 inches tall, and it adds another 45 lbs. This was never a camera one person carried. It was a camera that arrived on a dolly with a crew around it.
The RCA TK-40A Color Television Camera was introduced in 1954, and the family it belonged to carries a serious claim: the TK-40 is described as RCA's first color camera, and the TK-40 together with its modified successor, the TK-41, were the first television cameras able to broadcast live color images. The A suffix matters here — the TK-40A is the refined version of that first color camera, documented in a service manual printed in 1954 and featured in a 10-page article in RCA Broadcast News #77, January–February 1954.
What the camera actually did is spelled out plainly in the service literature, where it appears under its RCA Color Camera (MI-40500) designation. It was a live pick-up camera used to separate a color image into its primary red, blue, and green component images and convert them to signals required for the RCA color television system. That system, introduced in 1953, became known as NTSC — the standard still in use in the U.S. The TK-40A is where that standard stopped being a laboratory argument and started going out over the air.
Key Features
Three Image Orthicons Behind a Light-Splitting System
The heart of the TK-40A is a light splitting system feeding three image orthicon tubes, one per color channel. Around those tubes the camera carries horizontal and vertical deflection circuits, a target blanking circuit, a high voltage circuit, an image orthicon protection circuit, and three video preamplifier circuits — one for each of the three color channels. Contemporary descriptions of this generation of RCA color gear call them bulky monochrome-compatible units that separated images into red, green, and blue components for live color transmission, and the service manual's block-by-block account backs that up. This is not a single-tube design with a color filter wheel; it is three full camera chains sharing one housing.
Rotatable Four-Position Lens Turret
On the front of the camera sits a rotatable lens turret that accommodates four objective lenses of different focal lengths. Normally Ektar lenses having focal lengths of 50, 90, and 135mm are used, with the fourth position available for a telephoto lens. Field lenses are mounted on a "spider" support housed within the drum, and lens selection is made by a handle-type manual control on the back panel of the camera. In a live studio, that handle was the difference between a wide shot and a close-up without swapping glass.
Louvers on the Viewfinder Cover and Front Top
Ventilation is the fastest way to tell the TK-40A apart from its siblings. The TK-40A has louvers on the viewfinder cover and the front top, but not on the sides. The TK-40 prototype has square sides, is dark in color, and has no ventilation louvers at all, while the TK-41 adds additional louvers on the front top cover sides. Collectors sorting a pile of parts should start there. The individual image orthicon tubes and the area within the camera housing are air cooled, and all external areas of the camera and viewfinder subject to absorption of radiant heat energy have an aluminum finish — a working decision as much as a cosmetic one.
Three 24-Conductor Camera Cables
Power and signal voltages are conveyed to and from the camera by means of three standard 24 conductor camera cables. Filament voltages are supplied from two transformers housed in the camera, each adequately fused. Three fat cables trailing off the back of a 250-lb. head is the physical reality of live color in 1954 — this camera did not travel light, and the cable run was part of the rig.
Panning, Tilting, and Focusing Handles
Control handles project from the rear of the camera and are used for the control of panning and tilting motions. The handle on the right is also used for focusing the camera optical system. A hinged hood ahead of the viewfinder on the top of the camera housing offers accessibility to parts of the optical system. In practice, the operator stood behind the camera working those handles while a viewfinder image — and a tally light — told them they were live.
Tally Lights Front, Top, and Bezel
Two tally lights are mounted on the front face of the camera. There is also one tally on top of the viewfinder for directors and one on the kinescope bezel plate for the operator. These lights are normally off until a tally relay is activated by a control voltage (24 volts dc). Four separate tally positions tells you something about how these cameras were used: in a multi-camera studio, everyone in the room needed to know which head was hot.
Swing-Out Side Door Panels
The side door panels of the camera housing swing outward, making all components readily accessible for servicing. For a machine this dense — light splitter, three orthicons, deflection, blanking, high voltage, protection, and three preamps — that kind of access is not a convenience, it is a requirement. Two sets of communication and program sound jacks are mounted on a strip installed below the back (operating) panel of the camera, and the utility outlets and a fuse are mounted on the underside of the back end.
Proc Amp with Registration and Color Controls
The TK-40A's processing amplifier unit carries the registration and color controls for the 3 scanning yokes. Registration — keeping the three color images physically aligned — was the perennial headache of three-tube color, and the proc amp is where an engineer fought that battle.
Historical Context
The TK-40A arrived at the front of a very short list. RCA developed the first good color TV cameras, and by all accounts they were monsters. The TK-40A was featured in RCA Broadcast News #77, January–February 1954, in a 10-page article, and a service manual for the camera was printed the same year.
Deployment followed fast. Beginning with the "Colgate Comedy Hour" on 11/22/53, these cameras were in wide use at TV network and affiliate studios, as well as independent TV production facilities through the 1960's. Beginning in 1955, the series Climax! experimented with color broadcasting using the pioneering RCA TK-40A cameras. Four RCA TK-40A color cameras were used in the 1957 CBS production of Rodgers and Hammerstein's Cinderella — four massive cameras crammed, along with 56 performers, 33 musicians, and 80 stagehands and crew, into CBS Color Studio 72 in New York, which was notoriously tiny. The image of four of these heads shoulder to shoulder in a small studio is the whole story of early color television in one sentence.
The cameras also had a second life. At some facilities the TK-40A color cameras had been converted to the CBS "Video Scene" process, whereby they were used as black and white cameras for matte shots — the color gear pressed into service for monochrome compositing once newer cameras took over the color work. The TK-41 is described as the modified successor to the TK-40, and the TK-40A sits in that same line, refined and documented in the 1954 service literature.
Collectibility & Value
Survival is the whole game with the TK-40A. The historical record shows these cameras were being sold off while still in working order: a December 5, 1966 classified listing in Broadcasting advertised "Two modified RCA TK40A color Camera chains in working condition. Exceptional value." — with no price stated. That a pair of working color chains could be moved through a classified ad says everything about how quickly broadcast technology turned over in the 1960s.
What survives today tends to survive in institutions. One TK-40A, formerly at WKY-TV (now KFOR), was donated to a collection in 2009. No current market prices, common failures, or maintenance information are documented in the available record, and no original price has surfaced. Anyone chasing one should expect a museum-grade restoration project rather than a plug-and-play camera — three image orthicons, high voltage, and a light-splitting optical block are not casual service items, and the tubes in particular are the kind of thing that decides whether a camera is a display piece or a working machine.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.