RCA BTF 20E

A 20 kW FM transmitter that spent the 1970s in the racks of serious broadcasters, and by 1989 was showing up in the classifieds of Broadcast Engineering alongside somebody's used satellite dish.

Overview

The BTF 20E is an FM broadcast transmitter from RCA — the kind of equipment that lived in a station's transmitter building, not in a living room. The one hard fact that survives in the record is its model designation and its power class: this is a 20-kilowatt FM box, and the model number itself says so. Beyond that, the documentary trail is thin, and anyone writing about this machine has to be honest that most of what circulates about it comes from the secondary market rather than from RCA's own literature.

What is well documented is the BTF 20E's afterlife. Through 1989 and 1990, the classified pages of the broadcast trade press carried recurring listings from Transcom Corp. of Huntingdon Valley, Pennsylvania, offering the BTF 20E as used equipment. In one representative listing, the BTF 20E appears among a run of FM transmitters that includes a Harris FM20K, a Harris/Gates FM20H3, and an RCA 5D, all quoted with their build years. The BTF 20E is dated to 1976 in several of those listings, and at least one ad references two units — a 1976 and a 1972. That's the closest thing to a production window that the surviving record offers: units in the field dated 1972 and 1976, still being brokered more than a decade later.

Those classifieds are also a reminder of what this class of gear actually is. A 20 kW FM transmitter is not a collector's shelf piece. It's a building full of high-voltage supply, a final amplifier that expects a serious load, and a cooling requirement that shapes the room around it. When a station retired a BTF 20E, it didn't get boxed up and put in a closet — it got listed in a magazine next to a 1,000-foot guyed tower standing in Nebraska and a used remote truck. The Transcom ads of the period treat the BTF 20E as a commodity line item, priced by phone, with financing available.

The trade press of the era was also tracking the migration of FM transmission toward solid-state and lower-maintenance designs. In a 1983 feature on WFMT's satellite superstation operation, Audio (February 1983, p.44) described a Harris MS-15 exciter and stereo generator that had been custom-modified and built for the station by Harris to guarantee a specified signal-to-noise ratio. The detail is worth noting not because it involves the RCA — it doesn't — but because it shows where the engineering conversation had moved by the early 1980s: exciter and stereo-generation performance, not raw final-amplifier power. A 1970s-vintage 20 kW tube transmitter like the BTF 20E was, by then, the kind of equipment a station kept as a backup or sold off when it upgraded.

For anyone encountering a BTF 20E today, the practical picture is a machine that requires a broadcast engineer, not an enthusiast. The surviving documentation is essentially the classified record: Transcom's recurring listings establish that multiple units existed, that they were dated 1972 and 1976, and that they traded on the used market into the early 1990s. What the record does not preserve is the schematic, the tube complement, the dimensions, the original price, or the failure modes. Collectors who take on a transmitter of this class are usually doing it for the iron, the tubes, and the history — and they should expect to reverse-engineer the rest. [VERIFY: original RCA specification sheet and production run not located in available sources.]

eBay Listings

Search eBay for RCA BTF 20E

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models