Luxman R 800

A solid state AM/FM multiplex stereo receiver from the mid-1970s, known for warm, detailed sound and a modular power amp design.

Overview

The Luxman R-800 is a solid state AM/FM multiplex stereo receiver made in the mid-1970s. It puts out 40 watts per channel into 8Ω with low distortion and an 80 dB signal-to-noise ratio. The sound is warm and detailed. Inputs include dual phono MM, a microphone input, and dual tape playback. The power amp modules plug in at the rear, which makes servicing and repair easier.

Specifications

Tuning rangeFM, MW
Power output40 + 40 watts RMS into 8 ohms, both channels operating
Total harmonic distortion0.05%
Signal to noise ratio80 dB
Sensitivity (IHF)1.8 µvolt
InputsPhono MM 1, 2: 2.3 mV / 47kOhm, max. 130 mV (1 kHz); Microphone: 2 mV; Tape Play 1, 2: 150 mV / 30kOhm
Dimensions485 x 145 x 360 mm (W/H/D)
Weight13 kg

Design

The design is solid state, with plug-in power amp modules mounted at the rear. That makes maintenance and replacement easier.

Market

The Luxman R-800 had an original price of approximately 1,600 Deutsche Mark. Used units have been listed for around A$500 in very good condition. Service manuals are available for repair.

eBay Listings

Luxman R 800 vintage audio equipment - eBay listing photo 1
4x Clarion SE6935R 800W MAX Power 60W RMS 6×9″ Multiaxial 3-
$99.99
See all Luxman R 800 on eBay

As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.

Related Models