Luxman A-383 (1998–2001)
The Luxman A-383 is a compact integrated amplifier that Luxman produced from 1998 to 2001, aimed at the entry-level end of the lineup. It sold new for around €438, and today it typically changes hands for roughly €250. It came out of Luxman's late-1990s output, which leaned hard on the brand's own heritage. The front panel is machined from a solid 30mm block of brushed aluminum, and the overall look deliberately echoes the company's "Laboratory Reference Series" from earlier decades. Inside, it follows a dual-mono layout with separate transformers and rectifier sections for each channel. That is a surprising amount of engineering care for an entry-level unit.
On paper, the A-383 is rated at 2 × 60W into 8 ohms, 2 × 75W into 6 ohms and 2 × 90W into 4 ohms. Distortion is claimed at a very low 0.001% at 10W/8Ω, with a signal-to-noise ratio of 115dB. Frequency response runs from 10Hz to 100kHz. The phono stage is switchable between moving-magnet and moving-coil cartridges. There are jacks for patching a signal processor into the signal path, and provisions for optional remote-control accessories to tie into a multiroom setup. HiFI-Stereo (October 1994, p.50) noted that the phono input could be set for either MM or MC operation, and that the amplifier ran only moderately warm even under sustained high-level operation, a sign that heat dissipation was well managed.
The sound drew a mixed assessment. One source describes it as an entry-level unit with simpler circuitry, lacking the "beauty of sound" found in vintage Luxman amplifiers, despite the retro cosmetics. Dimensions are compact at 48 × 455 × 256 mm (H×W×D), and it weighs just 5.4 kg. That puts it in the modest, lifestyle-oriented corner of Luxman's late-90s catalog.
Similar items on eBay
No exact Luxman A-383 listings are live right now — these searches show current Luxman and similar vintage audio gear on eBay:
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.