JBL 6022 (Series II)

The JBL 6022 is a 2-way bookshelf loudspeaker from JBL's Control® Series, marketed as a high-output control monitor for project studios and home theater use. It pairs an 8" cast-frame woofer with a 3/4" (19mm) titanium-laminate dome tweeter in a ported, magnetically shielded enclosure — the shielding being a practical nod to placing the speakers near a television. The black vinyl finish keeps things utilitarian; these were tools, not furniture.

The specs tell a straightforward story: 150-watt power handling, a rated frequency response of 38 Hz to 24 kHz (±3 dB), an 8-ohm impedance, and 89 dB sensitivity. The crossover sits at 2.3 kHz. One detail that stands out in the surviving literature is the low-frequency acoustic rating, described in a cached JBL listing as a 5th-order Chebyshev alignment — an unusual choice for a compact bookshelf monitor, and one that likely explains why reviewers found the low end surprisingly robust for the cabinet size. Input is via 5-way gold-plated binding posts. Suggested amplifier power ran from 10 to 150 watts.

Sound & Video Contractor reviewed the 6022 favorably, calling it "a well-built, high-output compact monitor that should find a home in many production studios" and noting the low end was "surprisingly good for a box this size." The same review positioned it as a strong option for small studios monitoring at moderate levels without sacrificing accuracy. The 6022 was also compared alongside the smaller 6010 and 6012 models in that review, and the Series II designation indicates a later revision of the original 6022.

No production years or original retail price have surfaced in the available documentation. Used pairs have appeared on the secondary market in the $150–$200 range. It's a model that seems to have been well-regarded in its niche but lightly documented — the record is what it is.

- **Type:** 2-way bookshelf, ported, magnetically shielded

- **LF Driver:** 8" (200mm) cast-frame woofer

- **HF Driver:** 3/4" (19mm) titanium-laminate dome tweeter

- **Frequency Response:** 38 Hz – 24 kHz (±3 dB)

- **Crossover:** 2.3 kHz

- **Impedance:** 8 ohms

- **Sensitivity:** 89 dB (1W/1m) — 89 dB SPL (2.83V/1M) per Sound & Video Contractor

- **Power Handling:** 150 watts (10W – 150W recommended)

- **Dimensions (H×W×D):** 15.3 × 10.6 × 9.9 in.

- **Weight:** 18.5 lbs.