Hitachi FP-22
A three-tube ENG camera that carried its own auto-setup brain in the head — and weighed enough to remind you of it.
Overview
The FP-22 was one of two three-tube ENG cameras Hitachi brought to the 1982 NCTA show, and the difference between the two tells you everything about where the company was positioning this model. The FP-21 and FP-22 were shown side by side at $10,900 and $13,900 respectively, and for that extra three grand the FP-22 added built-in auto-white, auto-black, and auto-centering — all performed in the camera head itself. The FP-21 did without. That "in the head" detail matters: setup automation that lives in the camera rather than in a separate control unit is what let a single operator get a usable picture without a bench full of gear, which is precisely the pitch ENG cameras were making to local-origination cable operations at the time.
The two cameras shared a signal-to-noise ratio of 55 dB, but the FP-22 pulled ahead on resolution at 580 lines against the FP-21's 550. Those are the numbers Hitachi put in front of the trade press at the show, and they're the numbers that separated the flagship from its cheaper sibling.
Weight, though, is where the FP-22's reputation gets complicated. In a period comparison ad for a competing camera, the FP-22 is listed at 11.7 pounds — set against an Ikegami HL-79 body at 13 pounds and a Philips LDK-14S at 11.9. The point of that ad was that the FP-22, while lighter than those two, was still a shoulder-borne camera you felt by the end of a shoot.
The FP-22 also turns up in dealer package listings as the heart of a complete portable studio. One distributor's modular three-piece package — packaged in protective cases with front and rear hard-shell covers, single-cable interconnect between modules for quick setup — was built around a pair of FP22-3 tube Saticon cameras with 10×11 power zooms at F1.6, operation panels on 50-foot cables, 5-inch and 1.5-inch viewfinders, lens drive kits, AC adaptors, batteries and chargers, and O'Connor fluid heads on wood tripods with dollies. That whole kit was quoted at $45,600 delivered with warranties. A separate listing for a larger facility package — two FP-22 cameras with microprocessor for automatic setup, a production switcher, time base corrector, character generator, convergence editor, and monitoring — came in at $198,500. These are dealer bundle prices, not camera prices, but they show the FP-22 being sold as the acquisition front end of serious local production rooms.
Mix (1984, p.116) ran a facility directory in which the FP-22's world — small production houses and mobile audio/video operations — is exactly the kind of outfit that would have bought one. It's a reminder that this camera lived in the trenches of regional production rather than on network lots.
What the FP-22 represents, then, is a very specific moment: the point at which a mid-tier Japanese manufacturer could put automatic white, black, and centering into the camera head and sell a three-tube Saticon ENG package as a turnkey studio. The 580-line resolution and 55 dB S/N are respectable for the class, and the auto-setup is the real story. The weight is the tax you paid for it.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.