Fairchild Model 659A Reverbertron
Six tuned electromechanical delay lines in seven inches of rack space — Fairchild's third-generation compact reverb, built to stack.
Overview
The Fairchild 659A Reverbertron is a dynamic reverberation system meant to sit in a broadcast or recording studio rack, and its whole reason for existing is compression of space. The third-generation "Reverbertron" announcement in Recording Engineer (February 1972, p.32) makes the pitch plainly: smaller PC boards and a generation unit only 3½ inches high — down from 19 inches — let an engineer stack several 659A's in the space a single earlier system once demanded. The full rack-mount chassis measures 19 inches wide, 9 inches deep, and 7 inches high, and it carries a lock mechanism for portability, a detail the period coverage treats as one of the model's headline changes over the preceding 659.
The reverb itself comes from six electro-mechanical delay lines, each tuned differently and each isolated against building rumble and environmental noise, per the same Recording Engineer announcement. Decay time is selectable across a 3-to-5-second range, and the unit offers local and remote selection of three degrees of reverberation — dry, premix 1, and premix 2 — with a continuous reverb mix control. DB Magazine (July 1971, p.20) lists the decay selector as offering short, medium, and long settings and confirms the same input, output, and control lineup in its performance-specification column.
The electronics are solid state, split across two separate enclosures, and the feature set is unusually complete for a reverb box of the period: full-range equalization with bass, midrange, and presence-peak selection plus high and rolloff controls, metering of all signals on an edgewise VU, and an input that accepts signals as low as -30 dBm. Maximum output is continuously adjustable to +18 dBm. Input impedance is 600 ohms, balanced or unbalanced. The Recording Engineer write-up counts eleven improvements in the 659A's electronics over its predecessor, including the lower input-level requirement and an improved signal-to-noise ratio of 65 dB — a figure DB Magazine (July 1971, p.20) frames as a 10 dB gain over the older model.
Frequency response is worth quoting carefully because it splits by path: Fairchild's manufacturer data reports ±1 dB from 20 Hz to 20 kHz on the dry channel, while the reverb channel runs 50 Hz to 6 kHz with ±15 dB of adjustment. That's not a limitation so much as the nature of the delay-line approach — the reverberant signal is deliberately band-shaped and then trimmed with the equalization controls.
Fairchild's own advertising billed the 659A as identical in performance characteristics to the preceding studio model 659 and claimed it superseded all other artificial reverberators within its price range by delivering the same natural, real-life effects as the world's finest acoustic chambers. That's marketing copy, not a measured verdict. The period press treated the 659A as a genuine revision rather than a rebadge — the lock mechanism, the reduced height, the lower input requirement, and the improved S/N all show up in independent coverage, and the Recording Engineer item is explicit that the compact model is a new generation rather than a repackaging.
The unit carries U.S. Patent #34336674, cited in Fairchild's advertisement. Robins Industries Corporation of Commack, New York handled distribution under the Robins/Fairchild name, and Fairchild Sound Equipment Corporation of Flushing, New York is the manufacturer named in the engineering data.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.