Audio-Technica AT-811
A unidirectional electret condenser that sold on smooth curves and a price tag, not a reputation.
Overview
The AT-811 is a unidirectional electret condenser microphone, and the way Audio-Technica pitched it tells you almost everything worth knowing. The company's own advertising for the AT-811 and its omnidirectional sibling, the AT-801, argued that EQ "should be used to improve the sound... not to fix the mike" — a jab at microphones whose response curves forced engineers into corrective equalization before they could get to the creative work. Whether or not the curves were as smooth as the copy claimed, the pitch was aimed squarely at the studio engineer who wanted a predictable signal at the console rather than a character piece.
The spec sheet bears out the practical side of that argument. The AT-811 carried a 600-ohm impedance and was rated at −56 dB sensitivity — a figure that sits comfortably in the range of a working studio condenser rather than a high-output specialist. It terminated in an XLR connector, which is the right answer for anything expected to live on a mic stand in a real room. Audio-Technica sold it in the UK at £41.61, positioning it just above the omnidirectional AT-801 at £37.56 and well below the less sensitive AT-812 at £45.47. That price ladder matters: the AT-811 was the middle child, the cardioid-pattern workhorse between the cheap omni and the hotter, costlier cardioid.
What the AT-811 was not, at least at first, was obvious. Modern Recording (October 1977, p.33) reported that Audio-Technica had only just added microphones to a catalog that had until then meant phono cartridges, headphones, and record-care accessories. The AT-811 and its stablemates were part of that first microphone line — three electret condensers and two dynamics. Collectors looking at an AT-811 today are looking at a company finding its feet in a category it would later dominate.
The advertising leaned hard on versatility. Audio-Technica's copy placed the AT-811 anywhere in the mix — brass, reeds, percussion, chorus, strings — and promised that what was heard in the studio would be heard at the console. That is marketing language, and it should be read as such, but the underlying claim about usable headroom has a technical logic to it: a microphone without pronounced peaks leaves more room before a preamp or line amp runs out of clean gain, and it gives a compressor or limiter less spurious peak material to chase.
It is worth being honest about what the record does and does not show. The AT-811 appears in dealer and distributor listings across several years — DB Magazine (August 1978, p.43) lists the AT-801 and the AT-803S lavalier in its microphone roundup, and the AT-811 turns up in Audio-Technica's UK price tables alongside the AT-812 and AT-813. Period coverage of the AT-811 specifically is thin; the loudest voice in the room is Audio-Technica's own advertising. That is a meaningful limitation for anyone trying to assess the microphone on independent merit rather than manufacturer claims.
The AT-811 was never the flagship; that role belonged to the AT-813, which Recording Engineer (August 1977, p.80) noted was Audio-Technica's top microphone at $80, a unidirectional electret condenser measuring 20–20,000 Hz with −58 dB sensitivity. The AT-811 sat beneath it in the range, and that is exactly where it belongs in any honest assessment.
For a collector, the AT-811 is interesting less as a sonic landmark than as a document of a transition. It is an early Audio-Technica microphone from a company that had built its name on cartridges, sold on the promise of smooth response and honest pricing, and priced to sit in the middle of a small but coherent line. The XLR termination and 600-ohm impedance mean it will still talk to modern gear without drama, and the electret capsule is a known quantity to anyone who services condensers. It is not a prestige piece, and it does not pretend to be.
The flaws are the flaws of the category and the era. Period documentation for the AT-811 is fragmentary, independent reviews are scarce, and the model's reputation rests largely on advertising copy that promised more than any single spec sheet can confirm. Anyone buying one should expect a working studio tool rather than a collectible icon, and should verify condition carefully — the available record does not document service history, capsule aging, or common failure modes for this model specifically.
eBay Listings
As an eBay Partner, we earn from qualifying purchases. This helps support our independent vintage technology research.